This is a commercial carpet and upholstery extractor with an on-board heater. The heater warms the cleaning water to up to 65°C (149°F) to help break up grease and dirt. It is made for carpet and rugs.
The body is roto-molded polyethylene. It has a 4.8 gal clean water tank and a 5.3 gal dirty water tank. A diaphragm pump delivers 160 PSI (11 Bar), and the vacuum motor produces up to 30 KPA of suction.
It rolls on 6-inch wheels and 2-inch locking casters that hold it in place. The easy-push handle has a storage basket. The switches are water resistant, and the power cord plug glows when the cord has power. A neoprene Heatguard hose wrap and a 4-inch upholstery tool are included.
- Recommended surfaces
- Carpet and rugs
- Color
- Multicolor, Gray
- Heated temperature
- Up to 65°C (149°F)
- Heater power
- 1.74 HP (1300W)
- Vacuum motor
- 1.34 HP (1000W)
- Max suction
- 30 KPA
- Water pump
- Diaphragm, 160 PSI (11 Bar)
- Clean water tank
- 4.8 gal
- Dirty water tank
- 5.3 gal
- Voltage
- 110V 60Hz
- Power cord
- 25 ft
- Suction hose
- 15 ft
- Body
- Roto-molded polyethylene
- Wheels
- 6-inch wheels, 2-inch locking casters
- Dimensions
- 25 x 14 x 28 inches
- Weight
- 44 lbs
- Included
- 4-inch upholstery tool, Heatguard neoprene hose wrap, drain hose, storage basket on handle