The Wilson 801262 DB Pro is a dual-band cellular signal amplifier with 65 dB gain, built for homes, offices, fire stations, command posts and other buildings that need multi-room coverage. Paired with an external and an internal antenna, it can cover up to 5,000 square feet, depending on the outside signal and other factors. It is the amplifier on its own, not a full kit.
Two separate adjustable gain knobs, one for each band, let you set signal distribution and inside antenna placement. The amplifier is 75 ohm and uses standard RG-6 coax, which is already pre-wired in many homes and offices, and it connects through F-female connectors.
The amplifier supports multiple cell phones and data cards connected at the same time, and covers carriers that use CDMA, TDMA, GSM and 3G. Nextel/iDen and 4G are not supported.
- Bands
- Dual-band: 824-894 MHz / 1850-1990 MHz
- Gain
- 62 dB / 65 dB
- Gain control
- Separate adjustable knob for each band
- Max uplink power
- 1200 mW / 1114 mW
- Max downlink power
- 26 dBm / 25 dBm
- Noise figure
- 3.5 dB nominal
- Flatness
- ±5 dB
- Impedance
- 75 ohm
- Connectors
- F-Female
- Cable
- Standard RG-6 coax
- Coverage
- Up to 5,000 sq ft, depending on outside signal and other factors
- Carriers
- CDMA, TDMA, GSM and 3G; Nextel/iDen and 4G not supported
- Simultaneous use
- Multiple cell phones and data cards
- Power
- 120-240 V AC, 50-60 Hz, 8 W
- Dimensions
- 6.2 x 4.2 x 1.5 in
- Weight
- 0.64 lbs / 0.29 kg