StoreDeal.ai store
Shop
  • Deals
  • Deal checker
  • Black Friday
  • Buying guides
  • Brands
  • Stores
Travel
  • Flight deals
  • Hotel deals
Company
  • Research
  • Press
  • Use in AI assistants
  • Contact
  • deal.ai apps
Black Friday 2026
  • Walmart
  • Best Buy
  • Target
  • TVs
  • Laptops
  • Headphones
  • Apple
  • Gaming
  • Vacuums
  • Kitchen
  • Toys
  • Smartwatches
  • Tablets
  • Furniture
  • Mattresses
© Deal.ai Inc.·2222 Ponce de Leon Blvd, Miami, FL 33134·support@deal.ai
TermsPrivacy
Deal.ai › Compare

Bambu Lab P2S vs Flashforge Adventurer 5M 3D Printer

The Bambu Lab P2S is the stronger printer: enclosed, 256 mm cubed, 300°C hotend, hardened steel nozzle, AI failure detection, camera and AMS multi-color and drying support. The Flashforge Adventurer 5M is a fast open-frame CoreXY for PLA and PETG, with 600 mm/s motion and tool-free nozzle swaps, but a smaller 220 mm build and no camera or enclosure filtration. Reviewers rate the P2S far higher (4.9 vs 3.9) for print quality and ease of setup; the 5M wins on simplicity and beginner-friendly quick starts.

  • Choose the Bambu Lab P2S if you print ABS, ASA or filled filaments, want multi-color and a camera, and value clean prints with little tuning.
  • Choose the Flashforge Adventurer 5M if you mainly print PLA and PETG, want fast setup and quick nozzle changes, and do not need an enclosed chamber.

Prices

  • Bambu Lab P2S: $399.99 at AJ Electronics (last seen Nov 17)
  • Flashforge Adventurer 5M 3D Printer: $212.97 at 3dprintersdepot.com (checked today)
  • Difference: the Flashforge Adventurer 5M 3D Printer is $187.02 cheaper than the Bambu Lab P2S at the latest prices (Nov 17 and Nov 20)
Bambu Lab
Bambu Lab P2S

Bambu Lab P2S

4.9(47 ratings)
$399.99at AJ ElectronicsChecked Nov 17
See all prices and details
Visit AJ Electronics
Pros
  • Clean, precise prints with little adjustment
  • Enclosed chamber and filtration for ABS and ASA
  • AI failure detection and 1080p camera
  • AMS 2 Pro adds multi-color and filament drying
  • Hardened steel nozzle handles reinforced filaments
Cons
  • Repairs can be hard; self-service guides needed
  • Larger footprint than an open-frame printer
  • AMS combo adds setup steps
Flashforge
Flashforge Adventurer 5M 3D Printer

Flashforge Adventurer 5M 3D Printer

3.9(278 ratings)
$212.97at 3dprintersdepot.comChecked 48 min ago
See all prices and details
Visit 3dprintersdepot.com
Pros
  • Fast 600 mm/s motion with high acceleration
  • Tool-free nozzle swap in about 3 seconds
  • Auto-leveling and quick out-of-box setup
  • Good for beginners printing PLA and PETG
Cons
  • No camera or enclosure filtration
  • Smaller 220 mm build volume
  • No multi-color support
  • Some PETG bridging needs supports

What separates them

Bambu Lab P2SFlashforge Adventurer 5M 3D Printer
Build volume256 x 256 x 256 mm220 x 220 x 220 mm
EnclosureFully enclosed with carbon filtrationOpen frame, no filtration
Max nozzle temperature300°C, hardened steel nozzle280°C, quick-release nozzle
Material rangePLA, PETG, ABS, ASA, compositesPLA, PETG, PETG-CF, TPU
Camera and monitoring1080p camera with AI spaghetti detectionNo camera
Multi-colorAMS 2 Pro with filament dryingSingle extruder only
Max speedHigh-speed CoreXY, no published figureUp to 600 mm/s, 20,000 mm/s²
Nozzle changesSwappable, not tool-freeTool-free in about 3 seconds

Price history

$569.00$29.84
Oct 28Nov 20
  • Bambu Lab P2S: lowest $29.84 on Oct 28 at eBay; $449.00 on Nov 19.
  • Flashforge Adventurer 5M 3D Printer: lowest $69.99 on Nov 7 at Amazon; $212.97 on Nov 20.

Prices at every store

Bambu Lab P2S

  • AJ ElectronicsNew

    In stockReturn policy

    $399.99Checked Nov 17
    Visit AJ Electronics
  • Atome3D Imprimante 3D FranceNew

    In stockShips from abroad · priced in EUR (€377.31) · duties may applyReturn policy

    $415.57Checked Nov 17
    Visit Atome3D Imprimante 3D France
  • Centrale Atome3DNew

    In stockShips from abroad · priced in EUR (€393.58) · duties may apply

    $433.49Checked Nov 17
    Visit Centrale Atome3D
  • B&H Photo-Video-AudioNew

    In stock

    $449.00Free shippingChecked 17 h ago
    Visit B&H Photo-Video-Audio

Also available at

  • eBayCheck price at eBay
  • Swing DesignCheck price at Swing Design
  • Ultimate 3D Printing StoreCheck price at Ultimate 3D Printing Store
All 52 stores and price history →

Flashforge Adventurer 5M 3D Printer

  • 3dprintersdepot.comNew

    In stock

    $212.97Checked 48 min ago
    Visit 3dprintersdepot.com
  • FlashforgeNew

    In stock

    $229.00Checked 48 min ago
    Visit Flashforge
  • USA Tool DepotNew

    Availability unknown

    $227.00Checked 48 min ago
    Visit USA Tool Depot
  • Geyer Instructional ProductsNew

    Availability unknown

    $229.00Checked 48 min ago
    Visit Geyer Instructional Products

Also available at

  • FlashforgeCheck price at Flashforge
All 51 stores and price history →

Specs compared

SpecBambu Lab P2SFlashforge Adventurer 5M 3D Printer
MaterialPlasticAll-metal structure (CoXY)
Weight0.0626 kg23.81 lbs
Included AccessoriesST3x24x7 screw, BufferScrewdriver, Glue, Grease, Unclogging Pin Tool
Number Of Extruders1 extruder1
Build Volume256 x 256 x 256 mm220 x 220 x 220 mm
Printing TechnologyFused Deposition ModelingFDM
Filament Diameter1.75 mm1.75 mm
KitYesYes
Voltage100-120 VAC, 50/60 Hz110 volts
Build plate✓Flexible removable PEI steel plate
ColorBlackBlack
BodyBuild Volume (WDH) 256256256 mm³—
Show all 40 specsShow fewer specs
SpecBambu Lab P2SFlashforge Adventurer 5M 3D Printer
ChassisPlastic and Steel—
Outer FramePlastic and Glass—
ToolheadExtruder Gear Hardened Steel—
NozzleHardened Steel—
Max Nozzle Temperature300 °C—
Included Nozzle Diameter0.4 mm—
Supported Nozzle Diameter0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm—
Filament CutterBuilt-in—
Extruder MotorBambu Lab High-precision Permanent Magnet Synch…—

What reviewers say

Bambu Lab P2S

  • 4.9 / 5Google Shopping · 70 ratings

Reviewers describe the P2S as a refined, easy-to-use enclosed printer that turns out clean, professional-level prints with little adjustment. They note a gentle learning curve for newcomers and quiet, fast extrusion. The main complaints are its size, that no filament ships with it and that repairs can be difficult.

What people mention
  • Print qualityPraisedOwners report clean, professional-level results with little tuning.
  • Setup and calibrationPraisedIntelligent calibration makes it nearly problem-free, even for newcomers.
  • NoisePraisedReviewers call operation quiet for a CoreXY machine.
  • FootprintCriticisedOne reviewer says it takes up a lot of space on a desk.

Flashforge Adventurer 5M 3D Printer

  • 3.9 / 5278 ratings

Rated 3.9 out of 5 from 278 ratings. Owners like the speed and the leveling, while complaints center on noise and setup.

What people mention
  • SpeedPraisedOwners say prints come out quickly at high speed settings.
  • LevelingPraisedThe one-click auto leveling gives a good first layer with little fuss.
  • NoiseCriticisedReviewers find it loud when printing fast.
  • SetupMixedSome say assembly and first calibration take time; others find it quick.
Reviews
  • The Best 3D Printers We've Tested for 2026
  • Best 3D Printers - The reviews on this page have been selected by our editors, but have been optimized by our commerce team
  • 3D Printer Reviews From Our Experts
  • Bambu Lab P2S Review: As Close to Perfection as 3D Printers Get - PCMag editors select and review products independently
  • This 3D Printer Is My Pick for a CNET Editors' Choice Award and Here’s Why - CNET
  • Bambu Lab P2S

Questions and answers

Which is better for ABS and ASA?
The P2S. Its enclosed chamber, carbon filtration and 300°C hotend are built for engineering filaments. The 5M is open-frame and listed for PLA and PETG.
Which is better for beginners?
Both are easy to start, but the 5M is simpler and cheaper to enter with, while the P2S gives more reliable results on harder materials. Reviewers call the P2S gentle for newcomers despite its depth.
Which prints faster?
The 5M publishes 600 mm/s and 20,000 mm/s² acceleration, higher than typical CoreXY figures. The P2S is fast too but does not publish a top speed; real print time depends on material and part.
Is the P2S worth stepping up to?
Yes if you need an enclosure, multi-color, a camera or engineering materials. If you only print PLA and PETG, the 5M covers that with less complexity.
Which lasts longer?
The P2S uses a hardened steel nozzle and steel chassis, which suits abrasive filaments better. The 5M's quick-release nozzles are easy to replace but softer; both need routine maintenance.
Can either print multi-color?
Only the P2S, with the AMS 2 Pro combo. The 5M has a single extruder and no multi-material unit.

Ask our shopping agent

It checks today's price at every store, compares the alternatives and answers in about a minute.

Enter to send, Shift+Enter for a new line

More comparisons

  • Bambu Lab P2S vs Creality Ender 3 V3 SE
  • Bambu Lab A1 with AMS Lite vs Bambu Lab P2S
  • Bambu Lab P1S with AMS vs Bambu Lab P2S
  • Bambu Lab P2S vs Elegoo Neptune 4 Plus
  • Bambu Lab P2S vs Bambu Lab A1 3D Printer and A1 AMS-Lite Combo
  • Bambu Lab P2S vs Bambu lab P1S Combo with AMS
  • Bambu Lab P2S vs Creality K2 Combo Enclosed Printer
  • Bambu Lab P2S vs Bambu Lab A1 mini

Buying guides that pick them

  • Best 3D printers for beginners
  • Best 3D printers for hobbyists
  • Best 3D printers for home use
  • Best enclosed 3D printers under $400
  • Best budget enclosed 3D printers for common materials
Heatbed
Build Plate Material Flexible Steel Plate
—
ModelP2S AMS COMBO—
ConfigurationPrinter + AMS 2 Pro—
TechnologyFused deposition modeling, fully enclosed—
Max heatbed temperature110°C—
Max toolhead speed600mm/s—
Max acceleration20,000mm/s²—
StorageBuilt-in 8 GB eMMC and USB port—
Physical dimensions392 x 406 x 478mm—
Net weight15 kg—
Spool holder✓—
Accessory box✓—
size—Adventurer 5M
Filament Type—PLA, PETG
Printing Material Type—PLA, PETG, PETG-CF, TPU
Layer Resolution—0.1-0.4 mm
Connectivity—Wi-Fi, Ethernet
Type—3D Printer
Design Highlights—Enclosed chamber