Bambu Lab X2D Combo vs Bambu Lab P1S + AMS
Buy the X2D Combo if you print engineering materials or need a second nozzle for support or a second material. Buy the P1S + AMS if you mainly print PLA and PETG in multiple colors and want to spend less. As of November 4, 2026, the X2D Combo is $781.06 at 3D Printing Canada and the P1S + AMS is $509.00 at Bambu Lab US, a gap of about $272.
Today the Bambu Lab P1S + AMS costs $272.06 less at its best price.
Ask our shopping agent
Bambu Lab X2D Combo
5Choose the X2D Combo if you print ABS, ASA or other warp-prone filaments and want a heated chamber plus a dedicated support nozzle.
- Dual nozzle cuts purge waste and print time on multi-material jobs
- 65°C heated chamber helps ABS and ASA resist warping
- AI detection covers the whole filament path, plus spaghetti and clump checks
What separates them
| Bambu Lab X2D Combo | Bambu Lab P1S + AMS | |
|---|---|---|
| Price as of November 4, 2026 | $781.06 at 3D Printing Canada | $509.00 at Bambu Lab US |
| Nozzle system | Dual nozzle: main nozzle prints, auxiliary handles support or a second material | Single 0.40 mm nozzle, color changes through the AMS |
| Chamber heating | Active chamber heating to 65°C | Enclosed, max build plate 100°C, no active chamber heater |
| Build volume | 256 × 256 × 260 mm | 256 × 256 × 256 mm |
| Max speed | Not published in the given specs | 500 mm/s, 20,000 mm/s² acceleration |
| Purge waste on multi-material jobs | Second nozzle avoids AMS swaps for support material | Every color or material change purges through one nozzle |
| AI monitoring |
Price history
- Bambu Lab X2D Combo: lowest $789.00 on Nov 4 at B&H Photo-Video-Audio.
- Bambu Lab P1S + AMS: lowest $349.00 on Oct 28 at Amazon; $509.00 on Nov 3.
Prices at every store
Bambu Lab X2D Combo
- 3D Printing CanadaNew
In stockReturn policy
$781.06Observed at 6:13 AM - B&H Photo-Video-AudioNew
In stock
$789.00Free shippingObserved at 6:13 AM - fbrc8 llcNew
In stockReturn policy
$789.00Observed at 6:13 AM - Indicate TechnologiesNew
In stockReturn policy
$789.00Observed at 6:13 AM
Also available at
- 3DChimeraCheck price at 3DChimera
- Ecovate 3DCheck price at Ecovate 3D
- Platinum HobbiesCheck price at Platinum Hobbies
Specs compared
| Spec | Bambu Lab X2D Combo | Bambu Lab P1S + AMS |
|---|---|---|
| Build volume | 256 × 256 × 260 mm³ | 256mm x 256mm x 256mm |
| Nozzle temperature | 300°C | — |
| Chamber heating | 65°C | — |
| Nozzle system | Dual-nozzle system | — |
| Filament feeders | Two filament feeders | — |
| Extruder setup | hybrid direct-and-Bowden extruder setup | — |
| Filament module | rear-mounted filament module | — |
| Cooling system | Dual-intake cooling system | — |
| AI monitoring | Full filament path AI detection | — |
| AMS compatibility | With AMS 2 Pro |
What reviewers say
Bambu Lab X2D Combo
Owners rate it 5 out of 5 across 9 ratings, and one long-term user reports over 400 hours of printing with only a few small problems. The common theme is that it works without tinkering: design, slice, print.
- Prints reliably with little tuning
- Dual-nozzle setup simplifies multi-material jobs
- Clean surface finish at speed
- Strong results with support material
- A few small problems showed up after 400+ hours
- Setup and calibration take time
Bambu Lab P1S + AMS
Owners treat the P1S as a workhorse: fast, reliable, and the cheapest way into an enclosed CoreXY with a multi-spool AMS. The common complaints are noise and the AMS's appetite for filament when swapping colors.
Questions and answers
- Which is better for printing ABS and ASA?
- The X2D Combo. Its 65°C heated chamber holds part temperature steady, which cuts warping on large ABS and ASA prints. The P1S is enclosed but has no active chamber heater.
- Is the X2D Combo worth about $272 more?
- Yes if you print support material or two materials often, since the second nozzle saves purge filament and time. If you print one material at a time in several colors, the P1S + AMS covers it for less.
- Which prints faster?
- The P1S lists 500 mm/s and 20,000 mm/s² acceleration; Bambu Lab does not publish speed figures for the X2D in the given specs. On multi-material jobs the X2D can finish sooner because it skips purge cycles.
- Do both do multi-color printing?
- Yes. Both work with an AMS, and the X2D Combo ships as a bundle with AMS 2 Pro support. The X2D adds a second nozzle on top of that.
- Which has the larger build volume?
- Nearly the same. The X2D is 256 × 256 × 260 mm and the P1S is 256 × 256 × 256 mm, a 4 mm height difference.
- Which is the better first printer?
- The P1S + AMS at $509.00. It is cheaper, fully enclosed and handles common filaments. Move to the X2D when you need a heated chamber or a support nozzle.
