Black FridayDealsBuying guidesBrandsStoresTermsPrivacydeal.ai apps

© Deal.ai Inc.

Deal.ai › Compare

BUCKTOOL Belt Sander, with 4 x 36 in. Belt & 6 in. Disc, 5.0A 3/4HP Direct-Drive Motor with Portable Aluminum Base, BD4603 vs 18V ONE+ 1/2"x18" Belt Sander

Buy the BUCKTOOL BD4603 if you want a fixed bench station for squaring edges, deburring metal and shaping small parts. Buy the Ryobi 18V 1/2"x18" belt sander if you need to reach installed work, strip rust or touch up tight spots by hand. The Ryobi is far cheaper at $79.99 at WoodArtSupply as of November 4, 2026, against $155.80 for the BUCKTOOL at WoodArtSupply on the same date. They are different tools, not two versions of one.

Today the 18V ONE+ 1/2"x18" Belt Sander costs $75.81 less at its best price.

Ask our shopping agent

Enter to send, Shift+Enter for a new line

BUCKTOOL
BUCKTOOL Belt Sander, with 4 x 36 in. Belt & 6 in. Disc, 5.0A 3/4HP Direct-Drive Motor with Portable Aluminum Base, BD4603

BUCKTOOL Belt Sander, with 4 x 36 in. Belt & 6 in. Disc, 5.0A 3/4HP Direct-Drive Motor with Portable Aluminum Base, BD4603

4.8· 81 ratings
$155.80at WoodArtSupplyObserved at 6:47 AM
Visit store

Choose the BUCKTOOL BD4603 if you want a corded 3/4 HP bench combo with a 4x36 belt and 6-inch disc for edge work, metal and small parts.

Pros
  • Direct-drive 3/4 HP motor resists bogging on hardwoods and metal
  • Belt plus 6-inch disc covers edge and face work in one station
  • Belt tilts 0 to 90 degrees for bevels and square edges
  • Cast aluminum table and base feel solid for the price
  • Runs continuously on wall power with no battery swaps
Cons
  • Twice the price of the Ryobi
  • Fixed bench unit; useless on installed or overhead work
  • Owners report the table can slip out of angle mid-use
  • Vibration can disturb angle settings
  • Only one belt and one disc included
Ryobi
18V ONE+ 1/2"x18" Belt Sander

18V ONE+ 1/2"x18" Belt Sander

$79.99at WoodArtSupplyObserved at 6:42 AM
Visit store

Choose the Ryobi 18V ONE+ if you need a handheld 1/2x18 belt sander for rust removal, restoration and spots a bench tool cannot reach.

Pros
  • Half the price at $79.99
  • Handheld, so it reaches installed trim, frames and railings
  • Three belts of different grits included
  • Runs on the wide 18V ONE+ battery line
  • Small 1/2-inch belt suits detail and tight spots
Cons
  • 1/2-inch belt removes stock slowly on large panels
  • No disc and no tilting table for precise edge angles
  • Battery and charger not included; cost adds up
  • Short 18-inch belt length wears faster
  • This listing is factory blemished, not new-condition stock

What separates them

BUCKTOOL Belt Sander, with 4 x 36 in. Belt & 6 in. Disc, 5.0A 3/4HP Direct-Drive Motor with Portable Aluminum Base, BD460318V ONE+ 1/2"x18" Belt Sander
Belt size4 x 36 in.1/2 x 18 in.
Second sanding surface6 in. discNone
Power sourceCorded, 5.0A, 3/4 HP induction motor18V ONE+ battery, sold separately
Form factorBench-top, cast aluminum baseHandheld
Belt tiltAdjustable 0 to 90 degreesNot adjustable
Portability to installed workNone; you bring the work to itFull; reaches overhead and in place
Included abrasivesOne belt and one discThree belts in varying grits
Price as of November 4, 2026$155.80 at WoodArtSupply$79.99 at WoodArtSupply

Price history

  • BUCKTOOL Belt Sander, with 4 x 36 in. Belt & 6 in. Disc, 5.0A 3/4HP Direct-Drive Motor with Portable Aluminum Base, BD4603: lowest $155.80 on Nov 4 at WoodArtSupply.
  • 18V ONE+ 1/2"x18" Belt Sander: lowest $79.99 on Nov 4 at WoodArtSupply.

Prices at every store

BUCKTOOL Belt Sander, with 4 x 36 in. Belt & 6 in. Disc, 5.0A 3/4HP Direct-Drive Motor with Portable Aluminum Base, BD4603

  • WoodArtSupplyNew

    In stock

    $155.80Free shippingObserved at 6:47 AM
    Visit store
  • eBayNew

    In stock

    $163.00Free shippingObserved at 6:47 AM
    Visit store
  • BucktoolNew

    In stockReturn policy

    $180.00Observed at 6:47 AM
    Visit store
All 3 stores and price history →

18V ONE+ 1/2"x18" Belt Sander

  • WoodArtSupplyNew

    In stock

    $79.99Free shippingObserved at 6:42 AM
    Visit store
  • Martexplore.comNew

    In stock

    $98.71Free shippingObserved at 6:42 AM
    Visit store
  • Home DepotNew

    In stock

    $99.00Free shippingObserved at 6:42 AM
    Visit store
  • Ryobi ToolsNew

    In stock

    $99.00Observed at 6:42 AM
    Visit store

Also available at

  • Direct Tools Factory OutletCheck price at Direct Tools Factory Outlet
All 5 stores and price history →

What reviewers say

BUCKTOOL Belt Sander, with 4 x 36 in. Belt & 6 in. Disc, 5.0A 3/4HP Direct-Drive Motor with Portable Aluminum Base, BD4603

Rated 4.8 out of 5 from 81 ratings, owners describe a sturdy, hardworking machine that is good value for the price. Most praise the motor and build; the recurring complaint is the work table losing its angle.

Pros
  • Strong motor that does not bog down
  • Feels solid and well made for a cost-effective tool
  • Easy to use right out of the box
  • Plenty of power for metalworking
Cons
  • Work tables can slip out of angle despite squaring them up
  • Possible excess vibration affecting angle settings

Questions and answers

Which is better for sanding metal?
The BUCKTOOL. Its 3/4 HP corded motor and 4x36 belt hold speed under load, and the disc handles deburring. The Ryobi's 1/2-inch belt is fine for light rust removal only.
Which is better for refinishing furniture in place?
The Ryobi. It is handheld and battery powered, so you can work on legs, rails and corners without moving the piece. The BUCKTOOL needs the work brought to the bench.
Is the BUCKTOOL worth the extra $75.81?
Yes if you need a fixed station with a disc and tilting belt for repeated edge and metal work. No if your jobs are touch-ups on installed material, where the Ryobi does the job for less.
Do I need to buy batteries for the Ryobi?
Yes, unless you already own 18V ONE+ packs. The $79.99 price covers the bare tool and three belts. Budget for a battery and charger if this is your first Ryobi tool.
Which lasts longer?
The BUCKTOOL should outlast it in heavy use. A corded induction motor and cast aluminum base have fewer wear points than a battery tool, though owners report table slip and vibration over time. The Ryobi's short belts wear out faster and its value depends on batteries you already own.
Can the Ryobi replace a bench sander?
No. It has no disc, no tilting table and a 1/2-inch belt, so squaring edges and shaping small parts are slow and imprecise. Treat it as a complement to a bench unit, not a substitute.

More comparisons

  • BUCKTOOL Belt Sander, with 4 x 36 in. Belt & 6 in. Disc, 5.0A 3/4HP Direct-Drive Motor with Portable Aluminum Base, BD4603 vs PROXXON BS/E Belt Sander
  • PROXXON BS/E Belt Sander vs 18V ONE+ 1/2"x18" Belt Sander