StoreDeal.ai store
Shop
  • Deals
  • Deal checker
  • Black Friday
  • Buying guides
  • Brands
  • Stores
Travel
  • Flight deals
  • Hotel deals
Company
  • Research
  • Press
  • Use in AI assistants
  • Contact
  • deal.ai apps
Black Friday 2026
  • Walmart
  • Best Buy
  • Target
  • TVs
  • Laptops
  • Headphones
  • Apple
  • Gaming
  • Vacuums
  • Kitchen
  • Toys
  • Smartwatches
  • Tablets
  • Furniture
  • Mattresses
© Deal.ai Inc.·2222 Ponce de Leon Blvd, Miami, FL 33134·support@deal.ai
TermsPrivacy
Deal.ai › Compare

CRAFT RESIN Deep Pour Casting Epoxy vs EasyCast Clear Casting Resin

Craft Resin is the deep-pour epoxy: it casts up to 2 inches per layer, mixes 2:1, and gives 90 minutes of working time, so it suits river tables, large molds and thick castings. EasyCast is a small-casting and coating epoxy: 1:1 by volume, low odor, 3/8 inch maximum depth, and it cures tack-free in 8 to 12 hours. Craft Resin's 4.9 rating from over 3,000 buyers reflects its following among table makers; EasyCast is a long-standing hobby brand with an FDA-compliant food-contact claim when mixed and cured correctly. Buy EasyCast for knobs, small molds and thin coatings; buy Craft Resin for anything thick.

  • Choose the Craft Resin if you are pouring river tables, deep molds or castings thicker than 3/8 inch and want a slow, self-leveling 2:1 mix.
  • Choose the EasyCast if you are casting small decorative pieces or thin coatings and want a simple 1:1 mix that sets tack-free overnight.

Prices

  • CRAFT RESIN Deep Pour Casting Epoxy: $299.99 at Craft Resin US (checked today)
  • EasyCast Clear Casting Resin: $42.00 at The Compleat Sculptor, Inc (checked today)
  • Difference: the EasyCast Clear Casting Resin is $257.99 cheaper than the CRAFT RESIN Deep Pour Casting Epoxy today
CRAFT RESIN
CRAFT RESIN Deep Pour Up to 2" Casting Epoxy 1.5 Gallon | Mix (2:1), Crystal Clear

CRAFT RESIN Deep Pour Casting Epoxy

CRAFT RESIN Deep Pour Up to 2" Casting Epoxy 1.5 Gallon | Mix (2:1), Crystal Clear

4.9(3,145 ratings)
$299.99at Craft Resin USChecked 2 h ago
See all prices and details
Visit Craft Resin US
Pros
  • Pours up to 2 inches deep in one layer, so large castings need fewer layers
  • 90-minute working time leaves room to mix, degas and pour big volumes
  • 600 CPS self-leveling formula helps release trapped bubbles
  • Heat resistant to 176°F once cured
  • High rating across thousands of buyers
Cons
  • Full cure takes 48 to 72 hours
  • 2:1 ratio needs accurate measuring
  • Needs a well-ventilated space and SDS handling care
  • Large kit is more resin than a small-project hobbyist will use
EasyCast
EasyCast Clear Casting Resin

EasyCast Clear Casting Resin

$42.00at The Compleat Sculptor, IncChecked 2 h ago
See all prices and details
Visit The Compleat Sculptor, Inc
Pros
  • 1:1 by volume is easy to measure and hard to get wrong
  • Low odor and solvent-free, comfortable for indoor hobby work
  • Tack-free in 8 to 12 hours, so small pieces finish fast
  • FDA compliant for food-contact use when measured, mixed and cured correctly
  • Works with Castin' Craft pigments, dyes and molds
Cons
  • 3/8 inch maximum depth rules out thick castings and river tables
  • 20 to 30 minute working time is short for large batches
  • No stated heat resistance
  • Small 32-ounce kit goes quickly on bigger projects

What separates them

CRAFT RESIN Deep Pour Casting EpoxyEasyCast Clear Casting Resin
Maximum pour depthUp to 2 inches per layer3/8 inch per pour
Mix ratio2:1 resin to hardener1:1 by volume
Working timeAbout 90 minutes20 to 30 minutes
Tack-free time48 to 72 hours to full cure8 to 12 hours tack-free, 72 hours full cure
Viscosity600 CPS, self-leveling, bubble-release formulaNot stated; thicker, suited to small molds
Odor and solventsVentilation and SDS handling requiredLow odor, solvent-free
Heat resistanceUp to 176°F once curedNot stated
Kit size1.5 gallons total32 ounces total

Prices at every store

CRAFT RESIN Deep Pour Casting Epoxy

  • Craft Resin USNew

    In stockReturn policy

    $299.99Checked 2 h ago
    Visit Craft Resin US
Prices and history →

EasyCast Clear Casting Resin

  • The Compleat Sculptor, IncNew

    In stockReturn policy

    $42.00Checked 2 h ago
    Visit The Compleat Sculptor, Inc
Prices and history →

Specs compared

SpecCRAFT RESIN Deep Pour Casting EpoxyEasyCast Clear Casting Resin
Maximum pour depthUp to 2″ per layer3/8 inch
Kit contents1.5 gallons total (1 gal resin + 0.5 gal harden…16oz Resin + 16oz Hardener (32ounce)
Mix ratio2:1—
Working time90 min—
Full cure time48–72 hours—
Mixed viscosity600 CPS—
Heat resistance176°F—
CertificationsConforms to ASTM D-4236—
StorageStore in a cool, dry place away from sunlight—
Mixing ratio—1:1
Formula—Low odor & solvent-free
Finish—Crystal-clear, high-gloss
Show all 19 specsShow fewer specs
SpecCRAFT RESIN Deep Pour Casting EpoxyEasyCast Clear Casting Resin
Maximum pour—up to 6 oz per pour
Model—33032
Color—Clear
Height—21.6 cm
Length—6.4 cm
Width—12.7 cm
Weight—0.91 kg

What reviewers say

CRAFT RESIN Deep Pour Casting Epoxy

  • 4.9 / 53,145 ratings

Rated 4.9 from over 3,100 ratings, buyers mostly report clear, bubble-free results on deep pours and praise the long working time. Complaints center on the slow cure and the need for ventilation.

What people mention
  • ClarityPraisedBuyers say cured pieces come out clear and glass-like.
  • BubblesMixedMost report few trapped bubbles, but some still get surface bubbles on deep pours.
  • Working timePraisedThe roughly 90-minute pot life is enough to fill large molds and tables.
  • Cure timeCriticisedOwners find the 48–72 hour cure slow and say it ties up molds.

Questions and answers

Which is better for a river table?
Craft Resin. Its 2-inch-per-layer depth and 90-minute working time are built for thick, large pours. EasyCast tops out at 3/8 inch, so a river table would need many thin layers.
Can I use EasyCast for a deep mold?
Only in layers. EasyCast allows up to 3/8 inch per pour, and you build depth by layering after each layer sets. For a single thick pour, use Craft Resin.
Which is easier to mix?
EasyCast, because 1:1 by volume is simple to measure. Craft Resin's 2:1 ratio is still straightforward but needs more care with the hardener amount.
Which sets faster?
EasyCast is tack-free in 8 to 12 hours. Craft Resin stays workable longer and takes 48 to 72 hours to fully cure, which suits deep pours that need slow, controlled hardening.
Is Craft Resin worth stepping up to for small projects?
Usually not. For knobs, small molds and thin coatings, EasyCast's low odor, 1:1 mix and overnight set are a better fit. Craft Resin pays off when depth and volume matter.
Does either resist heat?
Craft Resin states heat resistance up to 176°F once fully cured. EasyCast does not list a heat resistance figure, so keep hot items off EasyCast surfaces.

Ask our shopping agent

It checks today's price at every store, compares the alternatives and answers in about a minute.

Enter to send, Shift+Enter for a new line

More comparisons

  • Alumilite Amazing Clear Cast Epoxy Resin 32oz vs EasyCast Clear Casting Resin
  • Fast-Curing Epoxy Resin Kit Low Odor Bubble-Free Non-Yellowing vs EasyCast Clear Casting Resin
  • Alumilite Amazing Clear Cast Epoxy vs EasyCast Clear Casting Resin
  • Crystal Clear Epoxy Resin vs EasyCast Clear Casting Resin
  • Alumilite Amazing Clear Cast Epoxy vs CRAFT RESIN Deep Pour Up to 2" Casting Epoxy 1.5 Gallon | Mix (2:1), Crystal Clear
  • Crystal Clear Epoxy Resin vs CRAFT RESIN Deep Pour Up to 2" Casting Epoxy 1.5 Gallon | Mix (2:1), Crystal Clear
  • Clear Epoxy Resin Kit - 32 oz vs EasyCast Clear Casting Resin

Buying guides that pick them

  • Best clear epoxy resins for crafting
  • Best low-odor clear epoxy resins under $100