StoreDeal.ai store
Shop
  • Deals
  • Deal checker
  • Black Friday
  • Buying guides
  • Brands
  • Stores
Travel
  • Flight deals
  • Hotel deals
Company
  • Research
  • Press
  • Use in AI assistants
  • Contact
  • deal.ai apps
Black Friday 2026
  • Walmart
  • Best Buy
  • Target
  • TVs
  • Laptops
  • Headphones
  • Apple
  • Gaming
  • Vacuums
  • Kitchen
  • Toys
  • Smartwatches
  • Tablets
  • Furniture
  • Mattresses
© Deal.ai Inc.·2222 Ponce de Leon Blvd, Miami, FL 33134·support@deal.ai
TermsPrivacy
Deal.ai › Compare

Delta ShopMaster S36-295 Table Saw vs Craftsman CMXETAX69434502 Table Saw

Both saws run a 15-amp motor at 5,000 RPM and cut 10-inch blades, so raw power is a wash. The Delta ShopMaster wins on rip capacity (16 inches right of the blade vs 12 on the Craftsman) and has a flip-down fence for narrow rips, while the Craftsman ships with a folding stand and a quick-release rip fence. Owners of both report the fences need careful setup to stay square, and the Delta's 4.2 rating from 156 buyers is solid but not glowing. Buy the Delta if you rip wide sheet goods; buy the Craftsman if you want a stand included and move the saw between jobs.

  • Choose the Delta ShopMaster if you rip wide stock and want the extra 4 inches of right-side capacity plus a fence that flips down for narrow cuts.
  • Choose the Craftsman if you want a folding stand in the box and a quick-release fence you can set and reset fast on a jobsite.

Prices

  • Delta ShopMaster S36-295 Table Saw: $71.60 at Quality Furniture (last seen Nov 10)
  • Craftsman CMXETAX69434502 Table Saw: $21.99 at eBay (last seen Nov 9)
  • Difference: the Craftsman CMXETAX69434502 Table Saw is $49.61 cheaper than the Delta ShopMaster S36-295 Table Saw at the latest prices (Nov 9 and Nov 10)
DELTA
Delta ShopMaster 15A 10 inch Portable Table Saw

Delta ShopMaster S36-295 Table Saw

Delta ShopMaster 15A 10 inch Portable Table Saw

4.2(156 ratings)
$71.60at Quality FurnitureChecked Nov 10
See all prices and details
Visit Quality Furniture
Pros
  • 16 in rip right of the blade handles wide sheet goods
  • Flip-down ripping fence makes narrow rips repeatable
  • Tool-less riving knife and pawls speed setup
  • Blade retracts below the table for cleanup
  • 2.5 in dust port takes a shop vacuum
Cons
  • Stand is not included
  • 61 lbs is the heavier of the two
  • Fence needs checking for square out of the box
  • No published cut depth at 90°
Craftsman
Craftsman 10-in 15-Amp 120-Volt Corded Portable Jobsite Table Saw with Folding Stand CMXETAX69434502

Craftsman CMXETAX69434502 Table Saw

Craftsman 10-in 15-Amp 120-Volt Corded Portable Jobsite Table Saw with Folding Stand CMXETAX69434502

$21.99at eBayChecked Nov 9
See all prices and details
Visit eBay

Store links may earn us a commission.

Pros
  • Folding stand included, so it rolls to the jobsite
  • Quick-release rip fence resets fast
  • 3-1/8 in cut depth at 90° is clearly stated
  • Slightly lighter at 58 lbs
  • Blade guard and anti-kickback pawls both fitted
Cons
  • 12 in right rip is 4 in less than the Delta
  • Left rip capacity not published
  • Dust port size not published
  • Fence squareness is a common owner complaint on jobsite saws

What separates them

Delta ShopMaster S36-295 Table SawCraftsman CMXETAX69434502 Table Saw
Right rip capacity16 in12 in
Left rip capacity10 inNot published
StandSold separately (S36-320S universal stand)Folding stand included
FenceOne-touch fence with flip-down ripping fenceQuick-release locking rip fence
Weight61 lbs58 lbs
Dust port2.5 in port for vacuum hookupDust collection, port size not published
Blade guardAnti-kickback pawls, riving knife, retracting bladeBlade guard plus anti-kickback pawls
Cut depth at 90°Not published3-1/8 in

Price history

$199.00$21.99
Nov 2Nov 17
  • Delta ShopMaster S36-295 Table Saw: lowest $71.60 on Nov 10 at Quality Furniture; $199.00 on Nov 17.
  • Craftsman CMXETAX69434502 Table Saw: lowest $21.99 on Nov 9 at eBay; $199.00 on Nov 17.

Prices at every store

Delta ShopMaster S36-295 Table Saw

  • Quality FurnitureNew

    In stock

    $71.60+ $19.95 shippingChecked Nov 10
    Visit Quality Furniture
  • WalmartNew

    In stock

    $199.00Free shippingChecked 4 h ago
    Visit Walmart
  • Martexplore.comNew

    In stock

    $223.75Free shippingChecked 5 h ago
    Visit Martexplore.com
  • eBayNew

    Availability unknownSold by renleys

    $256.41Checked 5 h ago
    Visit eBay

Also available at

  • WalmartCheck price at Walmart

Store links may earn us a commission.

All 4 stores and price history →

Craftsman CMXETAX69434502 Table Saw

  • Lowe'sNew

    In stock

    $199.00Free shippingChecked 4 h ago
    Visit Lowe's
  • eBayNew

    Availability unknownSold by ann201221

    $21.99Checked Nov 9
    Visit eBay
  • Kaufman Realty & AuctionsNew

    Availability unknown

    $60.00Checked Nov 9
    Visit Kaufman Realty & Auctions
  • The Bill Stade Auction & RealtyNew

    Availability unknown

    $130.00Checked Nov 9
    Visit The Bill Stade Auction & Realty

Store links may earn us a commission. Some prices via Klarna.

All 10 stores and price history →

Specs compared

SpecDelta ShopMaster S36-295 Table SawCraftsman CMXETAX69434502 Table Saw
Voltage120V120.0 -Volt
Weight61 lbs. (23.13 kg)58 lbs
Material CompatibilityPressure treated lumber, Hardwood flooringWood working materials
Cutting MaterialWoodWood working materials
Power SourceCorded ElectricCorded Electric
CordlessNoNo
Battery IncludedNoNo
Safety HighlightsAnti-kickback pawlsBlade guard, Anti-kickback pawls
Anti-KickbackYesYes
Blade Diameter10 in10-in
Motor Amperage15 Amps15-amp
Motor Power15 amp15-amp
Show all 40 specsShow fewer specs
SpecDelta ShopMaster S36-295 Table SawCraftsman CMXETAX69434502 Table Saw
Motor Speed5000 rpm5,000 RPM
Performance Speed5000 rpm5,000-RPM
Saw UseCutting pressure-treated lumber, Cutting hardwo…Cutting
Usage HighlightsDust CollectionDust Collection
Cutting Capacity16 inches (right rip)12 in (right rip)
Cutting GuidesRip fenceRip fence
colorBlack—
size31 in:21.5 in:17.74 in—
Motor15 amp, Single phase, 60 Hz—

What reviewers say

Delta ShopMaster S36-295 Table Saw

  • 4.2 / 5156 ratings

Buyers rate it 4.2 out of 5 across 156 ratings. Most call it good value, easy to assemble and strong enough for long rips. Complaints center on the screw-on stand and inconsistent blade guards.

What people mention
  • PowerPraisedOwners say the 15-amp motor never bogged down cutting 8-foot lengths.
  • SetupMixedMostly pre-assembled and easy to put together, but the stand must be screwed on by hand.
  • Cut qualityPraisedBuyers report smooth, precise cuts through varied materials.
  • PortabilityPraisedAt 61 pounds it is easy to move and store.

Craftsman CMXETAX69434502 Table Saw

Owners describe it as a capable, affordable jobsite saw for framing and general woodworking, with the folding stand a common selling point. Complaints center on fence alignment, vibration and the effort of moving it.

What people mention
  • Rip fenceCriticisedOwners say the fence can drift out of square and needs checking before accurate cuts.
  • Motor powerPraisedReviewers report the 15-amp motor handles thick hardwood and long rips without stalling.
  • PortabilityMixedThe folding stand helps, but at 58 lbs many find it heavy to lift alone.
  • VibrationCriticisedSome owners notice vibration and noise when cutting dense material.

Questions and answers

Which is better for ripping plywood and wide boards?
The Delta. Its fence rips 16 inches to the right of the blade versus 12 on the Craftsman, which matters when you break down sheet goods. The Craftsman is fine for dimensional lumber and trim.
Does the Craftsman come with a stand?
Yes. The CMXETAX69434502 ships with a folding stand. The Delta does not include a stand; it is designed to work with the Delta ShopMaster S36-320S universal stand, sold separately.
Which is easier to move around?
The Craftsman, mainly because of the folding stand. At 58 lbs it is also 3 lbs lighter than the Delta's 61 lbs, and the stand lets you wheel it rather than carry it.
Is the Delta worth stepping up to over the Craftsman?
If rip capacity is your priority, yes. The Delta gives you 4 more inches to the right of the blade and a flip-down fence for narrow rips. If you mostly need a saw that travels with its own stand, the Craftsman covers that without extra parts.
Do both have anti-kickback protection?
Yes. Both list anti-kickback pawls, and both have an electric brake. The Craftsman also lists a blade guard; the Delta lists a riving knife with tool-less assembly.
Which has better dust collection?
The Delta publishes a 2.5-inch dust port that hooks to a vacuum, so you know what hose fits. The Craftsman lists dust collection but does not publish a port size, so check the port before buying an adapter.

Ask our shopping agent

It checks today's price at every store, compares the alternatives and answers in about a minute.

Enter to send, Shift+Enter for a new line

More comparisons

  • Delta ShopMaster 15A 10 inch Portable Table Saw vs Anqdy 15 Amp 10 inch Corded Electric Table Saw Power Saw 4600 RPM
  • Garvee 10 Inch 15A Table Saw & Stand vs Delta ShopMaster 15A 10 inch Portable Table Saw
  • Anqdy 15 Amp 10 inch Corded Electric Table Saw Power Saw 4600 RPM vs Craftsman 10-in 15-Amp 120-Volt Corded Portable Jobsite Table Saw with Folding Stand CMXETAX69434502
  • Table Saw 10 Inch, 15 Amp 5000RPM Powerful Tablesaw with Stand & Push Stick vs Craftsman 10-in 15-Amp 120-Volt Corded Portable Jobsite Table Saw with Folding Stand CMXETAX69434502
  • Delta ShopMaster 15A 10 inch Portable Table Saw vs DeWalt DWE7491RS
  • Delta ShopMaster 15A 10 inch Portable Table Saw vs CRAFTSMAN 10" Table Saw with Stand
  • Delta ShopMaster 15A 10 inch Portable Table Saw vs Table Saw 10 Inch, 15 Amp 5000RPM Powerful Tablesaw with Stand & Push Stick
  • Delta ShopMaster 15A 10 inch Portable Table Saw vs SKIL TS6307-00 15 Amp Corded 10 Inch Table Saw with Foliding Stand

Buying guides that pick them

  • Best 10-inch table saws for home workshops
  • Best 10-inch table saws under $250
  • Best 10-inch table saws
  • Best table saws
  • Best corded table saws
Speed
5000 RPM
—
Max. Rip Right of Blade16 in. (406.4mm)—
Max. Rip Left of Blade10 in. (254mm)—
Blade Tilt45º Left—
Dust Port Size2.5 in. (63.5mm)—
Table Size30 in. x 20.5 in. (762mm x 520.7mm)—
Blade Change SystemTool-less assembly (of riving knife and anti-ki…—
Blade HighlightsRetracts below table top—
Motor TypeBrushed—
Design TypeTable Saw—
PortableYes—
Amps15 Amps—
Maximum speed5000 rpm—
Power typeCorded Electric—
Assembled product weight32 lb—
Power saw typeTable Saws—
Cutting diameter10 in—
BrandDELTA—
FeaturesCompact Design, Lightweight—