StoreDeal.ai store
Shop
  • Deals
  • Deal checker
  • Black Friday
  • Buying guides
  • Brands
  • Stores
Travel
  • Flight deals
  • Hotel deals
Company
  • Research
  • Press
  • Use in AI assistants
  • Contact
  • deal.ai apps
Black Friday 2026
  • Walmart
  • Best Buy
  • Target
  • TVs
  • Laptops
  • Headphones
  • Apple
  • Gaming
  • Vacuums
  • Kitchen
  • Toys
  • Smartwatches
  • Tablets
  • Furniture
  • Mattresses
© Deal.ai Inc.·2222 Ponce de Leon Blvd, Miami, FL 33134·support@deal.ai
TermsPrivacy
Deal.ai › Compare

Creality Ender-3 V3 SE vs Bambu Lab A1 mini

The A1 mini is the better printer for most people: it calibrates itself before every print, prints far faster, has a 300°C all-metal hotend, a camera and optional four-color AMS lite. The Ender-3 V3 SE gives you a much larger 220 x 220 x 250 mm build volume and a direct-drive extruder that handles flexible TPU well, but it needs more tinkering and prints slower. Buy the A1 mini for small, detailed, fast work; buy the Ender-3 V3 SE when you need to print big parts on a budget.

  • Choose the Ender-3 V3 SE if you need a large build volume, print flexible TPU, and don't mind doing some manual tuning.
  • Choose the A1 mini if you want fast, near-hands-off printing with automatic calibration, a camera and optional multi-color.

Prices

  • Creality Ender-3 V3 SE: $77.96 at Quality Furniture (last seen Nov 10)
  • Bambu Lab A1 mini: $165.34 at Atome3D Imprimante 3D France (checked today)
  • Difference: the Creality Ender-3 V3 SE is $87.38 cheaper than the Bambu Lab A1 mini at the latest prices (Nov 10 and Nov 20)
Creality
Ender-3 V3 SE 3D Printer

Creality Ender-3 V3 SE

Ender-3 V3 SE 3D Printer

4.8(296 ratings)
$77.96at Quality FurnitureChecked Nov 10
See all prices and details
Visit Quality Furniture
Pros
  • Large 220 x 220 x 250 mm build volume
  • Direct-drive extruder handles flexible TPU
  • Dual Z-axis screws and dual Y linear shafts for stability
  • Fast 20-minute assembly
  • Power loss recovery and SD card printing
Cons
  • Slower than the A1 mini
  • No camera or remote monitoring
  • Manual tuning still needed for best results
  • Single color only
  • Open frame, no enclosure
Bambu Lab
Bambu Lab A1 mini

Bambu Lab A1 mini

$165.34at Atome3D Imprimante 3D FranceChecked 56 min ago
See all prices and details
Visit Atome3D Imprimante 3D France
Pros
  • Automatic calibration before every print
  • Very fast: up to 500 mm/s and 10,000 mm/s²
  • 300°C all-metal hotend with swappable nozzles
  • Built-in camera for remote monitoring and timelapses
  • AMS lite combo adds up to 4-color printing
Cons
  • Small 180 x 180 x 180 mm build volume
  • No filament included in the box
  • TPU support is limited compared with a direct-drive Ender
  • AMS lite adds bulk to a compact machine

What separates them

Creality Ender-3 V3 SEBambu Lab A1 mini
Build volume220 x 220 x 250 mm180 x 180 x 180 mm
CalibrationCR Touch auto leveling plus strain-sensor Z offset; some setupFully automatic before every print
Print speed180 mm/s typical, 250 mm/s maxUp to 500 mm/s, 10,000 mm/s² acceleration
HotendStandard, PLA/PETG/TPU300°C all-metal, optional 0.2/0.6/0.8 mm nozzles
ExtruderSprite direct drive, good for flexible TPUDirect drive, no TPU emphasis
Camera and monitoringNoneBuilt-in camera up to 1080p
Multi-colorSingle extruder onlyAMS lite combo for up to 4 colors
AssemblyAbout 20 minutes, 3 stepsMostly pre-assembled, quick setup

Price history

$199.99$77.96
Oct 30Nov 20
  • Creality Ender-3 V3 SE: lowest $77.96 on Nov 10 at Quality Furniture; $141.00 on Nov 20.
  • Bambu Lab A1 mini: lowest $199.00 on Nov 3 at 3D Universe; $199.00 on Nov 20.

Prices at every store

Creality Ender-3 V3 SE

  • Quality FurnitureNew

    In stock

    $77.96+ $19.95 shippingChecked Nov 10
    Visit Quality Furniture
  • Creality USANew

    In stock

    $141.00Free shippingChecked 1 h ago
    Visit Creality USA
  • Creality Official StoreNew

    In stockReturn policy

    $159.00Checked 54 min ago
    Visit Creality Official Store
  • AmazonNew

    Availability unknown

    As an Amazon Associate, Deal.ai earns from qualifying purchases.

    $150.47Free shippingChecked Nov 10
    Visit Amazon

Also available at

  • MakerParts 3DCheck price at MakerParts 3D
  • 3Digital | Droni e Stampanti 3DCheck price at 3Digital | Droni e Stampanti 3D

Store links may earn us a commission.

All 25 stores and price history →

Bambu Lab A1 mini

  • Atome3D Imprimante 3D FranceNew

    In stockShips from France · priced in EUR (€150.42) · duties may applyReturn policy

    $165.34Checked 56 min ago
    Visit Atome3D Imprimante 3D France
  • Ultimate 3D Printing StoreNew

    In stockReturn policy

    $199.00Checked 56 min ago
    Visit Ultimate 3D Printing Store
  • Bambu Lab USNew

    In stock

    $199.00Free shippingChecked 1 h ago
    Visit Bambu Lab US
  • fbrc8.comNew

    Availability unknown

    $199.00Checked 1 h ago
    Visit fbrc8.com

Also available at

  • 3D UniverseCheck price at 3D Universe
  • 3D HerndonCheck price at 3D Herndon
  • HartSmart ProductsCheck price at HartSmart Products
All 36 stores and price history →

Specs compared

SpecCreality Ender-3 V3 SEBambu Lab A1 mini
Filament Diameter1.75 mm1.75 mm
Filament TypePLA, PETGPETG
Printing Material TypeTPU, PETG, PLA, PlasticABS
Build Volume220 x 220 x 250 mm180 x 180 x 180 mm
Printing TechnologyFDMFused Filament Fabrication (FFF), Fused Deposit…
Layer Resolution0.1-0.35 mm50-300 microns
ConnectivityWi-FiWi-Fi
Type3D Printer3D Printer
MaterialPlastic (base)All-metal linear rails and bearings
Design HighlightsOpen frameEnclosed chamber
Depth364 mm31.5 cm
Height490 mm36.5 cm
Show all 40 specsShow fewer specs
SpecCreality Ender-3 V3 SEBambu Lab A1 mini
Weight7.34 kg5.5 kg
Width349 mm34.7 cm
Printing Speed180 mm/s (Typical Printing Speed)Up to 10,000 mm/s² (acceleration)
Supported File FormatsSTL, 3MF, AMF, OBJGcode
Number Of Extruders11
Display Screen TypeColor Knob ScreenIPS Touch Screen
Memory Card SlotYes (SD Card)Yes (microSD)
Built-In CameraNoYes
Safety FeaturesPower loss recoveryPower loss recovery

What reviewers say

Creality Ender-3 V3 SE

  • 4.8 / 5296 ratings

Rated 4.8 out of 5 from 296 ratings, the Ender-3 V3 SE is well liked as an easy, low-cost first printer. Complaints center on hardware fit and packing rather than print quality.

What people mention
  • LevelingPraisedOwners say CR Touch and auto Z offset remove the paper test and knob turning.
  • ExtruderPraisedThe Sprite direct drive is reported to feed PLA, PETG and TPU 95A reliably.
  • Build qualityMixedThe frame and dual Z screws feel solid, but some units arrive with loose or ill-fitting rail and plate parts.
  • SetupPraisedBuyers report it prints within about 20 minutes of unboxing.

Bambu Lab A1 mini

  • 4.8 / 5Google Shopping · 1,683 ratings

Reviewers call the A1 mini an easy, fast and capable entry-level printer with very good print quality, quick setup and simple filament loading. The main drawbacks they mention are its small print area and the lack of filament in the box.

What people mention
  • SetupPraisedOwners say auto-calibration makes the first print quick and painless.
  • Print qualityPraisedReviewers report clean, high-quality prints for the price.
  • SpeedPraisedFast acceleration makes short prints noticeably quick.
  • Multicolor
Reviews
  • The Best 3D Printers We've Tested for 2026
  • Best Cheap 3D Printers
  • Best 3D Printers - The reviews on this page have been selected by our editors, but have been optimized by our commerce team
  • 3D Printer Reviews From Our Experts
  • These are the five best budget 3D printer deals for Amazon Prime Day — here's a guide to the best 3D printers for beginners - These are the
  • The Best Cheap 3D Printers for 2026 - PCMag editors select and review products independently

Questions and answers

Which is better for large prints?
The Ender-3 V3 SE. Its 220 x 220 x 250 mm volume is noticeably taller and wider than the A1 mini's 180 mm cube, so helmets, vases and big functional parts fit in one piece.
Which is better for beginners?
The A1 mini. It calibrates itself before every print, sets up quickly and reviewers call it nearly problem-free. The Ender-3 V3 SE is beginner-friendly but still expects you to learn leveling and tuning.
Which prints faster?
The A1 mini by a wide margin. It reaches up to 500 mm/s with 10,000 mm/s² acceleration, while the Ender-3 V3 SE runs around 180 mm/s typical and 250 mm/s max.
Can either print flexible TPU?
The Ender-3 V3 SE is the safer choice for TPU because of its Sprite direct-drive extruder. The A1 mini is aimed at rigid filaments, and flexible material is not its strength.
Is the A1 mini worth stepping up to over the Ender-3 V3 SE?
Yes if you print small parts, want speed, a camera and optional multi-color, and value hands-off operation. Stay with the Ender-3 V3 SE if build size and TPU matter more than speed and automation.
Which has better print quality?
Both are rated well, but reviewers consistently praise the A1 mini's good to very good quality with little tuning. The Ender-3 V3 SE can match it on simple parts once dialed in.

Ask our shopping agent

It checks today's price at every store, compares the alternatives and answers in about a minute.

Enter to send, Shift+Enter for a new line

More comparisons

  • Bambu Lab A1 with AMS Lite vs Bambu Lab A1 mini
  • Bambu Lab A1 mini vs Bambu Lab A1 3D Printer and A1 AMS-Lite Combo
  • Bambu Lab A1 mini vs Elegoo Neptune 4 Plus
  • Ender-3 V3 SE 3D Printer vs Bambu lab P1S Combo with AMS
  • Bambu Lab A1 mini vs Creality Ender 3 V3 SE
  • Bambu Lab A1 mini vs Bambu lab P1S Combo with AMS
  • Ender-3 V3 SE 3D Printer vs Qidi Q2
  • Bambu Lab A1 mini vs Neptune 4 Pro

Buying guides that pick them

  • Best 3D printers for beginners
  • Best 3D printers
  • Best entry-level 3D printers for beginners
  • Best beginner-friendly 3D printers
Storage Type
SD Card
microSD
Software CompatibilityCura, Linux, Simplify3D—
Max Hotend Temp—300°C (All-metal)
Filament Color—Random Color (samples)
Input Voltage—AC 100-240 V
Body—Build Volume(WDH) 180180180 mm³
Toolhead—Hot End All-Metal
Nozzle—Stainless Steel
Max Hot End Temperature—300 °C
Nozzle Diameter—0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm
Max Build Plate Temperature—80°C
Speed—Max Speed of Tool Head 500mm/s
Max Acceleration of Tool Head—10000mm/s²
Supported Filament—PLA, PETG, TPU, PVA Ideal
Sensors—Monitoring Camera Low Framerate Camera (Up to 1…
Filament Run Out Sensor—Yes
Filament Odometry—Yes
Power Loss Recover—Yes
Filament Tangle Sensor—Yes
Praised
The AMS lite enables four-color prints, though it is sold separately.