StoreDeal.ai store
Shop
  • Deals
  • Deal checker
  • Black Friday
  • Buying guides
  • Brands
  • Stores
Travel
  • Flight deals
  • Hotel deals
Company
  • Research
  • Press
  • Use in AI assistants
  • Contact
  • deal.ai apps
Black Friday 2026
  • Walmart
  • Best Buy
  • Target
  • TVs
  • Laptops
  • Headphones
  • Apple
  • Gaming
  • Vacuums
  • Kitchen
  • Toys
  • Smartwatches
  • Tablets
  • Furniture
  • Mattresses
© Deal.ai Inc.·2222 Ponce de Leon Blvd, Miami, FL 33134·support@deal.ai
TermsPrivacy
Deal.ai › Compare

Flashforge Creator 5 Pro vs Creality K2 Plus Combo

Buy the Flashforge Creator 5 Pro if you print multi-color or multi-material parts often and want no purge waste. Its four independent toolheads switch in about 7 seconds, so each color uses only its own filament. Buy the Creality K2 Plus Combo if you need a big build volume and a lower entry into multi-color. It prints up to 350 x 350 x 350 mm and uses one nozzle fed by a CFS box, which means purge waste on every color change. The Flashforge has the sturdier enclosed CoreXY design and the better filtration; the Creality has far more owner feedback and a larger, more established user base.

  • Choose the Flashforge Creator 5 Pro if you print multi-color or multi-material parts regularly and want zero purge waste, faster color changes and a fully enclosed, filtered chamber.
  • Choose the Creality K2 Plus Combo if you need a large 350 mm cubed build volume and want multi-color from a single-nozzle setup with AI cameras and a pre-assembled frame.

Prices

  • Flashforge Creator 5 Pro: $749.00 at 3dprintersdepot.com (last seen Nov 12)
  • Creality K2 Plus Combo: $546.00 at Alibaba.com (last seen Nov 10)
  • Difference: the Creality K2 Plus Combo is $203.00 cheaper than the Flashforge Creator 5 Pro at the latest prices (Nov 10 and Nov 12)
Flashforge
Flashforge Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer

Flashforge Creator 5 Pro

Flashforge Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer

4.6(10 ratings)
$749.00at 3dprintersdepot.comChecked Nov 12
See all prices and details
Visit 3dprintersdepot.com
Pros
  • Four toolheads give true multi-color and multi-material prints with no purge waste
  • Fully enclosed with active 65°C chamber heating and HEPA plus carbon filtration
  • Fast travel at 600 mm/s and 30,000 mm/s² acceleration
  • Toolheads swap in about 7 seconds with automatic offset calibration
Cons
  • Smaller 256 mm cubed build volume
  • Very few owner ratings so far
  • No built-in camera for remote monitoring
Creality
Creality K2 Plus Combo 3D printer

Creality K2 Plus Combo

Creality K2 Plus Combo 3D printer

4.1(1,200 ratings)
$546.00at Alibaba.comChecked Nov 10
See all prices and details
Visit Alibaba.com
Pros
  • Large 350 mm cubed build volume for helmets and big one-piece prints
  • Dual AI cameras detect failures and tune flow
  • Hot end reaches 350°C for engineering filaments
  • Pre-assembled and backed by a large user base
Cons
  • Single nozzle with CFS purges filament on every color change
  • Chamber tops out at 60°C
  • Some listings conflict on Wi-Fi and Ethernet support, so confirm before buying

What separates them

Flashforge Creator 5 ProCreality K2 Plus Combo
Build volume256 x 256 x 256 mm350 x 350 x 350 mm, about 2.5x the volume
Multi-color method4 independent toolheads, each with its own nozzle, extruder and heaterSingle nozzle fed by a CFS box, up to 16 colors with extra units
Purge waste on color changeZero purge; each toolhead carries its own filamentPurges filament at every color change
Chamber and filtrationActively heated to 65°C, HEPA 13 plus carbon filterActively heated to 60°C, air purifier included
Hot end temperature320°C max350°C max
Camera and monitoringNo built-in camera listedDual AI cameras for failure detection and flow tuning
Assembly and setupEnclosed CoreXY, auto calibration and levelingPre-assembled, ready after screen install
Owner feedback4.6 from 10 ratings4.1 from 1,200 ratings

Price history

$1,199.00$546.00
Nov 1Nov 16
  • Flashforge Creator 5 Pro: lowest $588.99 on Nov 10 at Alibaba.com; $799.00 on Nov 16.
  • Creality K2 Plus Combo: lowest $546.00 on Nov 10 at Alibaba.com; $1,099.00 on Nov 13.

Prices at every store

Flashforge Creator 5 Pro

  • WalmartNew

    In stock

    $799.00Checked 1 h ago
    Visit Walmart
  • Alibaba.comNew

    In stockShips from abroad · duties may apply

    $770.00+ $87.00 shippingChecked Nov 12
    Visit Alibaba.com
  • 3dprintersdepot.comNew

    Availability unknown

    $749.00Free shippingChecked Nov 12
    Visit 3dprintersdepot.com
  • AmazonNew

    Availability unknown

    As an Amazon Associate, Deal.ai earns from qualifying purchases.

    $799.00Free shippingChecked 40 min ago
    Visit Amazon

Also available at

  • WalmartCheck price at Walmart
  • eBayCheck price at eBay
  • FabreekoCheck price at Fabreeko

Store links may earn us a commission.

All 19 stores and price history →

Creality K2 Plus Combo

  • Alibaba.comNew

    In stockShips from abroad · duties may apply

    $546.00+ $32.80 shippingChecked Nov 10
    Visit Alibaba.com
  • Centrale Atome3DNew

    In stockShips from France · priced in EUR (€849.86) · duties may apply

    $948.86Checked Nov 8
    Visit Centrale Atome3D
  • MakerParts 3DNew

    Availability unknown

    $899.00Checked Nov 10
    Visit MakerParts 3D
  • Stay Ready To 3D PrintNew

    Availability unknown

    $899.00Checked Nov 10
    Visit Stay Ready To 3D Print

Also available at

  • eBayCheck price at eBay
  • Creality USACheck price at Creality USA

Store links may earn us a commission.

Specs compared

SpecFlashforge Creator 5 ProCreality K2 Plus Combo
AccelerationUp to 30,000 mm/s²<30000mm/s2
Display4-inch, 800 × 480 Full-Color TouchscreenYes
Filament diameter1.75 mm1.75 mm
ColorGraySilver
SizeCreator 5 Pro495*515*916mm
Build volume256 × 256 × 256 mm—
Toolheads4 Independent Toolheads—
Max extruder temp320°C—
Max bed temp120°C—
Active chamber tempUp to 65°C—
Print speedUp to 300 mm/s—
Travel speedUp to 600 mm/s—
Show all 40 specsShow fewer specs
SpecFlashforge Creator 5 ProCreality K2 Plus Combo
Layer thickness0.1–0.4 mm—
Standard nozzle0.4 mm—
ConnectivityUSB / Wi-Fi—
Number Of Extruders4 extruders—
Width (")256.0—
Four independent toolheadszero-purge color at a mid-range price—
3d printing technologyFused Deposition Modeling—
Maximum build capacity10 x 10 x 10—
3d printer minimum layer thickness256 mm—

What reviewers say

Flashforge Creator 5 Pro

  • 4.6 / 510 ratings

Feedback is limited to 10 ratings averaging 4.6 out of 5, so it is early. Buyers mainly praise the multi-color output without purge waste and the enclosed, quieter operation.

What people mention
  • Multi-colorPraisedOwners highlight four toolheads printing several colors in one job without purging.
  • WastePraisedMaterial switching is said to leave near-zero purge waste.
  • EnclosurePraisedThe enclosed frame is credited with quieter running and controlled fumes.
  • ReliabilityMixedWith only 10 ratings, buyers say it is too early to judge long-term durability.

Creality K2 Plus Combo

  • 4.1 / 51,200 ratings

Rated 4.1 out of 5 from about 1,200 ratings, the K2 Plus Combo is generally liked for its large enclosed build volume, multi-color output and fast printing. Complaints tend to center on setup and tuning effort, noise and the filament cost of multi-color jobs.

What people mention
  • Build volumePraisedOwners value the 350 mm cube for printing helmets and large props in one piece.
  • Multi-colorMixedThe CFS is praised for color output but criticized for purge waste and long print times.
  • SetupMixedPre-assembly helps, but users report tuning and calibration before results are reliable.
  • NoiseMixed

Questions and answers

Which is better for printing a cosplay helmet in one piece?
The Creality K2 Plus Combo. Its 350 mm cubed build volume fits large single-piece prints that the Flashforge's 256 mm cube cannot.
Which wastes less filament on multi-color prints?
The Flashforge Creator 5 Pro. Its four independent toolheads each carry their own filament, so there is no purge between colors. The Creality purges at every color change.
Which handles engineering filaments better?
Both are close. The Creality reaches a higher nozzle temperature at 350°C, while the Flashforge heats its chamber to 65°C and adds HEPA and carbon filtration.
Is the Flashforge worth stepping up to over the Creality?
Yes if multi-color or multi-material work is your main use. The toolhead design saves filament and time on every color change. If you mostly print single-color large parts, the Creality's bigger volume matters more.
Which is easier to set up?
The Creality arrives pre-assembled and needs only the screen installed. The Flashforge is also largely ready but requires its automatic calibration and leveling routine before the first print.
Which has more reliable owner feedback?
The Creality has far more ratings at 1,200 versus 10, so its 4.1 score is more statistically meaningful. The Flashforge's 4.6 comes from a small sample.

Ask our shopping agent

It checks today's price at every store, compares the alternatives and answers in about a minute.

Enter to send, Shift+Enter for a new line

More comparisons

  • Bambu Lab P1S + AMS vs Creality K2 Plus Combo 3D printer
  • Creator 5 vs Flashforge Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer
  • Snapmaker U1 vs Flashforge Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer
  • Bambu Lab P1S + AMS vs Flashforge Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer
  • Flashforge Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer vs Prusa XL+ 5-Toolhead 3D Printer
  • Bambu Lab H2D vs Flashforge Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer
  • Flashforge Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer vs Bambu lab P1S Combo with AMS
  • Flashforge Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer vs Prusa XL

Buying guides that pick them

  • Best 6-color 3D printers
  • Best multi-toolhead 3D printers
  • Best 3D printers
  • Best 3D printers for home use
All 33 stores and price history →
Heated build plate
N
—
Build plate leveling styleAuto-Bed Leveling—
BrandFlashforge—
Nozzle size0.4 mm—
Nozzle temperature range608 ºF—
Extrusion temperature range572-608—
Enclosed print chamberY—
Build plate materialPEI—
Build plate temperature range248°F—
Build rate600 mm/s—
Dimensions28.00 x 17.50 x 17.50 in—
Build plate dimensions10 x 10 x 10—
Filament feeder systemDirect Drive—
Display screen width1.9 in—
Display screen length3.5 in—
Build plate heat up time1 min—
Model nameCreator 5 Pro—
Assembled product weight40 lb—
Has nrtl listing certificationN—
Some find it quiet for its speed; others say it is loud in practice.