StoreDeal.ai store
Shop
  • Deals
  • Deal checker
  • Black Friday
  • Buying guides
  • Brands
  • Stores
Travel
  • Flight deals
  • Hotel deals
Company
  • Research
  • Press
  • Use in AI assistants
  • Contact
  • deal.ai apps
Black Friday 2026
  • Walmart
  • Best Buy
  • Target
  • TVs
  • Laptops
  • Headphones
  • Apple
  • Gaming
  • Vacuums
  • Kitchen
  • Toys
  • Smartwatches
  • Tablets
  • Furniture
  • Mattresses
© Deal.ai Inc.·2222 Ponce de Leon Blvd, Miami, FL 33134·support@deal.ai
TermsPrivacy
Deal.ai › Compare

MicroJig GRR-RIPPER 3D Pushblock vs Magswitch Vertical Featherboard Pro

These do different jobs, so most serious table saw users end up wanting both. The GRR-RIPPER 3D Pushblock is a hand-held pushblock that holds stock down and against the fence through rip cuts, bevels up to 45 degrees, and cuts on band saws, jointers and router tables. The Magswitch Vertical Featherboard Pro is a magnetic featherboard that clamps to a steel fence or steel table top and pushes thin stock down to stop ride-up and kickback. Buy the GRR-RIPPER first if you need control of the stock itself; buy the Magswitch first if thin stock lifting off the table is your problem.

  • Choose the GRR-RIPPER 3D Pushblock if you want one hand-held tool that keeps stock flat and tight to the fence on a table saw, band saw, jointer or router table, including bevel cuts.
  • Choose the Magswitch Vertical Featherboard Pro if you cut thin stock on a table saw with a steel Biesemeyer-style fence and want hands-free downward pressure that stays put without clamps.

Prices

  • MicroJig GRR-RIPPER 3D Pushblock: $37.49 at ChipsFly.com (checked today)
  • Magswitch Vertical Featherboard Pro: $28.99 at Amazon (checked today)
  • Difference: the Magswitch Vertical Featherboard Pro is $8.50 cheaper than the MicroJig GRR-RIPPER 3D Pushblock today
MicroJig
MicroJig GRR-RIPPER 3D Pushblock

MicroJig GRR-RIPPER 3D Pushblock

$37.49at ChipsFly.comChecked 3 h ago
See all prices and details
Visit ChipsFly.com
Pros
  • Keeps stock firmly against the fence and flat on the table
  • Works on four machine types, not just the table saw
  • Legs swap for different stock thicknesses and bevel cuts up to 45 degrees
  • Non-slip grip and balance support improve control near the blade
Cons
  • You must hold it through every cut, so both hands stay busy
  • Plastic body will not survive the same abuse as metal tools
  • Takes practice to set the legs right for each cut
Magswitch
Magswitch Vertical Featherboard Pro

Magswitch Vertical Featherboard Pro

4.8(14 ratings)
$28.99at AmazonChecked 3 h ago
See all prices and details
Visit Amazon

Store links may earn us a commission. As an Amazon Associate, Deal.ai earns from qualifying purchases.

Pros
  • Magnetic mounting sets up and moves in seconds on steel fences
  • Pushes thin stock down to prevent ride-up and kickback
  • Reversible for either side of the workpiece
  • Two units interlock for pressure before and after the blade
Cons
  • Only works on ferrous fences and steel table tops, not aluminum
  • Table saw use only
  • No angle or bevel capability
  • Smaller user base; ratings come from a modest number of owners

What separates them

MicroJig GRR-RIPPER 3D PushblockMagswitch Vertical Featherboard Pro
Tool typeHand-held pushblock you guide through the cutStationary featherboard mounted to the saw
Machines supportedTable saws, band saws, jointers and router tablesTable saw only
MountingNo mounting; you hold itMagnets anchor to steel fences and steel table tops
Bevel and angle workAdjustable legs support cuts up to 45 degreesVertical feathers only; no angle setting
Thin stock controlHolds stock down and against the fence by handContinuous downward pressure before and after the blade
Hands-free operationRequires both hands on the toolFrees your hands to feed the stock
Fence compatibilityWorks with any fenceNeeds a ferrous fence or steel table top
BuildPlastic body with non-slip grip and interchangeable legsCompressible gaskets with a 150 lb breakaway force rating

Price history

$60.30$28.99
Oct 31Nov 17
  • MicroJig GRR-RIPPER 3D Pushblock: lowest $37.49 on Oct 31 at ChipsFly.com; $37.49 on Nov 17.
  • Magswitch Vertical Featherboard Pro: lowest $28.99 on Nov 17 at Amazon.

Prices at every store

MicroJig GRR-RIPPER 3D Pushblock

  • ChipsFly.comNew

    In stock

    $37.49Checked 3 h ago
    Visit ChipsFly.com
  • eBayNew

    Availability unknownSold by michele7577 (100% positive, 10,600 ratings)Returns: Set by the eBay seller; the eBay Money Back Guarantee covers an item that doesn't arrive or isn't as described.

    $39.77Free shippingChecked Nov 9
    Visit eBay
  • WoodArtSupplyNew

    Availability unknown

    $44.95Checked 3 h ago
    Visit WoodArtSupply
  • AmazonNew

    Availability unknown

    As an Amazon Associate, Deal.ai earns from qualifying purchases.

    $48.00Free shippingChecked 3 h ago
    Visit Amazon

Also available at

  • eBayCheck price at eBay

Store links may earn us a commission.

All 16 stores and price history →

Magswitch Vertical Featherboard Pro

  • Klingspor's Woodworking ShopNew

    In stock

    $71.20+ $9.99 shippingChecked 3 h ago
    Visit Klingspor's Woodworking Shop
  • Highland WoodworkingNew

    In stockReturn policy

    $89.00Checked 3 h ago
    Visit Highland Woodworking
  • Rockler Woodworking and HardwareNew

    In stock

    $89.00+ $15.99 shippingChecked 3 h ago
    Visit Rockler Woodworking and Hardware
  • AmazonNew

    Availability unknown

    As an Amazon Associate, Deal.ai earns from qualifying purchases.

    $28.99Checked 3 h ago
    Visit Amazon

Also available at

  • Magswitch TechnologiesCheck price at Magswitch Technologies
  • Taylor ToolworksCheck price at Taylor Toolworks
  • WoodcraftCheck price at Woodcraft

Store links may earn us a commission.

Specs compared

SpecMicroJig GRR-RIPPER 3D PushblockMagswitch Vertical Featherboard Pro
Material CompatibilityWoodThin material
ApplicationCuttingEnsures that non-through cuts are a consistent …
Compatible Tool TypeTable Saws, Band saws, Jointers, Router tablesTable saw
Compatible WithBand saws, Bosch, Craftsman, Delta, DeWaltSteel table top, Different fence sizes, Steel t…
Dimensions6.25" x 8.25" x 2.5" (Package Dimensions)79.5 mm long x 49.5-69mm wide
Length8.25" (Package Dimensions)3.13 in
Weight1.8 lbs1.4 lbs
Depth2.5" (Package Dimensions)9.5 in
Width6.25" (Package Dimensions)49.5-69 mm
Typical UsersUNISEX, ADULTADULT, UNISEX
ColorYellowyellow
Overall MaterialPlasticCompressible gaskets
Show all 30 specsShow fewer specs
SpecMicroJig GRR-RIPPER 3D PushblockMagswitch Vertical Featherboard Pro
Accessory TypePushblockFeatherboard
Supported AccessoriesHandle BridgeSecond Pro Vertical featherboard
Safety FeaturesSafety, Protecting your hands at all timesPrevents ride-up and kickback
AngleUp to 45 0 (for bevel cuts)Vertical position
Cut DepthCan cut stock down to ?” x ?”Ensures that non-through cuts are a consistent …
Handle MaterialPlastic—
Grip TypeNon-slip—
Set Included ComponentsMain body, 1/2" Leg, 1/4" Leg, Balance Support,…—
Set Size

What reviewers say

MicroJig GRR-RIPPER 3D Pushblock

Owners of the GRR-RIPPER generally rate it highly as a safety upgrade, saying it gives control over narrow and short cuts that a push stick cannot. Complaints center on the plastic build and the learning curve.

What people mention
  • SafetyPraisedOwners say it keeps hands safely away from the blade on table saws and router tables.
  • Grip and controlPraisedThe three-point hold is described as steadier than a push stick on narrow and short stock.
  • BuildCriticisedSome owners find the plastic body and handle less durable than metal alternatives.
  • Learning curveMixedNew users say the grip takes a few cuts to get used to.

Magswitch Vertical Featherboard Pro

  • 4.8 / 514 ratings

Owners rate it highly and describe it as a solid, well-built hold-down that sets up fast on steel fences. The main caveats are that it only suits ferrous fences and that the magnets hold firmly enough to need a firm pull to release.

What people mention
  • Magnetic holdPraisedOwners say the magnets grip the fence firmly and keep the board pressed down through the cut.
  • SetupPraisedReviewers like that it mounts and adjusts without clamps or tracks.
  • BuildPraisedBuyers describe it as solid and well made.

Questions and answers

Which one is better for thin stock on a table saw?
The Magswitch Vertical Featherboard Pro. It holds thin material down continuously before and after the blade, which is exactly where thin stock lifts and kicks back. The GRR-RIPPER holds stock down too, but only where your hand is.
Can the GRR-RIPPER replace a featherboard?
No. It is a pushblock you move with the cut, so it cannot give constant pressure at a fixed point. Many woodworkers run a featherboard and a pushblock together.
Will the Magswitch fit my saw?
Only if your fence or table top is steel. It grips Biesemeyer-style steel fences and steel table tops; aluminum fences and most contractor saw tops will not hold it.
Which is more versatile?
The GRR-RIPPER. It works on table saws, band saws, jointers and router tables and handles bevel cuts up to 45 degrees. The Magswitch is a table saw accessory only.
Which lasts longer?
Both are durable in normal use. The GRR-RIPPER is plastic and wears with heavy daily pushing; the Magswitch has few moving parts but its grip depends on clean gaskets and magnets.
Is it worth owning both?
Yes, for regular table saw work. The featherboard handles constant downward pressure on thin stock, and the pushblock handles feeding and control near the blade.

Ask our shopping agent

It checks today's price at every store, compares the alternatives and answers in about a minute.

Enter to send, Shift+Enter for a new line

More comparisons

  • MicroJig GRR-RIPPER 3D Pushblock vs POWERTEC 2PK Universal Featherboard for Table Saw, Router Table, Router Fence and Band Saw
  • MicroJig GRR-RIPPER 3D Pushblock vs VEVOR precision miter gauge

Buying guides that pick them

  • Best table saw accessories
All 8 stores and price history →
1
—
DurabilityEnhance your product's protection and durability—
Included AccessoriesMain body, 1/2" Leg, 1/4" Leg, Balance Support,…—
Power SourceHand Powered—
Blade MaterialHigh Speed Steel—
Breakaway Force—150 lbs./ 68 kg
Maximum Shear—40 lbs. / 18 kg
Net Weight—1.4 lbs. / 0.63 kg
Footprint—3.13"x1.95-2.72 wide/ 79.5 mm long x 49.5-69mm …
Vertical Adjustment Range—+1.45" to -2.87"/ +37 mm to -73 mm
  • Fence compatibilityCriticisedIt only works on ferrous fences and steel tops, so aluminum and wood fences are out.