StoreDeal.ai store
Shop
  • Deals
  • Deal checker
  • Black Friday
  • Buying guides
  • Brands
  • Stores
Travel
  • Flight deals
  • Hotel deals
Company
  • Research
  • Press
  • Use in AI assistants
  • Contact
  • deal.ai apps
Black Friday 2026
  • Walmart
  • Best Buy
  • Target
  • TVs
  • Laptops
  • Headphones
  • Apple
  • Gaming
  • Vacuums
  • Kitchen
  • Toys
  • Smartwatches
  • Tablets
  • Furniture
  • Mattresses
© Deal.ai Inc.·2222 Ponce de Leon Blvd, Miami, FL 33134·support@deal.ai
TermsPrivacy
Deal.ai › Compare

NovoSphere Nema34 Stepper Motor Kit vs NovoSphere Nema 34 DM860S Stepper Kit

Buy the B kit if you need raw torque: its 12 N·m holding torque is roughly two and a half times the A kit's 4.6 N·m, and the DM860S driver accepts both AC and DC input with a 200 kHz pulse ceiling. Buy the A kit only if 4.6 N·m is enough for your axis and you want the DMA860H driver, which is a well-known, widely documented board. Both are open-loop two-phase 1.8° Nema 34 setups from the same brand, so build quality and documentation are comparable; the real split is torque and driver flexibility.

  • Choose the Nema34 4.6N.m kit if your machine needs modest holding torque and you want the familiar DMA860H driver that is easy to find wiring help for.
  • Choose the Nema34 12N.m kit if you are driving a heavy gantry, a mill table or a large router and need the extra torque plus AC or DC supply flexibility.

Prices

  • NovoSphere Nema34 Stepper Motor Kit: $207.43 at Walmart (checked today)
  • NovoSphere Nema 34 DM860S Stepper Kit: $355.40 at Walmart (checked today)
  • Difference: the NovoSphere Nema34 Stepper Motor Kit is $147.97 cheaper than the NovoSphere Nema 34 DM860S Stepper Kit today
NovoSphere
NovoSphere Nema34 2-phase Stepper Motor Kit 4.6N.M 6.0A 86CM45 Motor And 2.4-7.2A 18-80VAC DMA860H Driver

NovoSphere Nema34 Stepper Motor Kit

NovoSphere Nema34 2-phase Stepper Motor Kit 4.6N.M 6.0A 86CM45 Motor And 2.4-7.2A 18-80VAC DMA860H Driver

$207.43at WalmartChecked 58 min ago
See all prices and details
Visit Walmart
Pros
  • DMA860H is a common driver with plenty of published wiring and setup guides
  • 4.6 N·m suits smaller axes, so it is easier on the rest of the machine
  • Runs directly from 18–80 VAC mains-derived supplies
  • Simple DIP-switch configuration
Cons
  • Lowest torque of the two, so it will stall on heavy gantries or deep cuts
  • No DC input rating listed, which limits supply choices
  • Pulse frequency ceiling not published
NovoSphere
NovoSphere Nema 34 Open Loop Stepper Motor Driver Kit 12N.m 6.0A DM860S 2.4A-7.2A For 3D Printer CNC Engraving Milling Machine

NovoSphere Nema 34 DM860S Stepper Kit

NovoSphere Nema 34 Open Loop Stepper Motor Driver Kit 12N.m 6.0A DM860S 2.4A-7.2A For 3D Printer CNC Engraving Milling Machine

$355.40at WalmartChecked 59 min ago
See all prices and details
Visit Walmart
Pros
  • 12 N·m holding torque handles heavy loads and resists cutting forces
  • Accepts both AC and DC supplies across a wide range
  • 200 kHz pulse input supports fast step rates
  • Automatic idle-current reduction saves heat at standstill
  • 8.4 A peak output gives headroom over the 6.0 A motor rating
Cons
  • Heavier motor adds mass to a moving gantry
  • Open loop, so it can lose steps under overload with no feedback
  • DM860S is less commonly documented than the DMA860H

What separates them

NovoSphere Nema34 Stepper Motor KitNovoSphere Nema 34 DM860S Stepper Kit
Holding torque4.6 N·m12 N·m
Driver modelDMA860HDM860S
Supply input18–80 VACAC 24–70 V and DC 24–100 V
Output current2.4–7.2 A2.4–7.2 A, 8.4 A peak
Pulse input frequencyNot stated by the makerUp to 200 kHz
Microstep resolutionDIP-selectable on the DMA860HProgrammable
Idle-current reductionSupported on the DMA860HAutomatic
Motor frame86CM45, Nema 34, 1.8° step angle34CS120FK-600, Nema 34, 1.8° ±5% step angle

Prices at every store

NovoSphere Nema34 Stepper Motor Kit

  • WalmartNew

    In stockSold by Yisheng Department StoreReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.

    $207.43Free shippingChecked 58 min ago
    Visit Walmart
Prices and history →

NovoSphere Nema 34 DM860S Stepper Kit

  • WalmartNew

    In stockSold by Yisheng Department StoreReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.

    $355.40Free shippingChecked 59 min ago
    Visit Walmart
Prices and history →

Specs compared

SpecNovoSphere Nema34 Stepper Motor KitNovoSphere Nema 34 DM860S Stepper Kit
color—Other
Supply Voltage—up to +80 VAC / +100VDC
Output Current—2.4A–7.2A
Pulse Input Frequency—up to 200 KHz
Control Modes—PUL/DIR and CW/CCW Modes
DC Power Supply—24~100 VDC
Microstep Resolutions—Programmable
Idle-Current Reduction—Automatic
Input Voltage—DC 30-110V / AC 24-70V
Output Peak Current—2.1~8.4A
Continuous Current—7.5A
Operating Temperature—0℃ - 70℃
Show all 13 specsShow fewer specs
SpecNovoSphere Nema34 Stepper Motor KitNovoSphere Nema 34 DM860S Stepper Kit
Weight—Approx.580g

Questions and answers

Which kit is better for a CNC router?
The 12 N·m kit. A router gantry and the cutting load need torque margin, and 4.6 N·m will stall sooner on deep passes or fast rapids.
Which is better for a 3D printer?
Neither is a natural fit. Both are large Nema 34 open-loop kits aimed at CNC and engraving; a 3D printer normally uses much smaller Nema 17 motors.
Does the 12 N·m kit work on DC power?
Yes. The DM860S takes DC 24–100 V as well as AC 24–70 V, while the A kit lists AC input only.
Will the bigger motor lose steps?
Both are open loop, so neither reports position. The 12 N·m motor has far more margin before it stalls, which makes lost steps less likely under load.
Is the DMA860H worth choosing over the DM860S?
Only if 4.6 N·m is enough for your axis. The DMA860H has more community documentation, but the DM860S offers more torque and wider supply options.
Which lasts longer?
Both use the same open-loop two-phase motor and driver architecture, so life depends on load, cooling and supply quality. Running the 12 N·m motor well below its rating will keep it cooler.

Ask our shopping agent

It checks today's price at every store, compares the alternatives and answers in about a minute.

Enter to send, Shift+Enter for a new line

More comparisons

  • NovoSphere Nema34 2-phase Stepper Motor Kit 4.6N.M 6.0A 86CM45 Motor And 2.4-7.2A 18-80VAC DMA860H Driver vs NovoSphere Nema 34 Closed Stepper Motor Kit With Encoder 8.5N.m 4.9A And 20-80VAC/24-100 VDC Driver With 1.5M Free Cable
  • NovoSphere Nema34 2-phase Stepper Motor Kit 4.6N.M 6.0A 86CM45 Motor And 2.4-7.2A 18-80VAC DMA860H Driver vs Eugene Color Nema34 12.2Nm Closed Loop Stepper Motor Kit 86HS120N+ HBS86H Stepper Motor With Encoder 2 Phase 6A 30-100v Servo Motor Kit
  • NovoSphere Nema34 2-phase Stepper Motor Kit 4.6N.M 6.0A 86CM45 Motor And 2.4-7.2A 18-80VAC DMA860H Driver vs NovoSphere Nema 34 Closed Loop Stepper Motor Kit 8.5N.m 6.0A Stepper Motor With Brake And CLE34 Closed Driver 1.5M Encoder Cable
  • NovoSphere Nema 34 Closed Stepper Motor Kit With Encoder 8.5N.m 4.9A And 20-80VAC/24-100 VDC Driver With 1.5M Free Cable vs NovoSphere Nema 34 Open Loop Stepper Motor Driver Kit 12N.m 6.0A DM860S 2.4A-7.2A For 3D Printer CNC Engraving Milling Machine

Buying guides that pick them

  • Best NEMA 34 stepper motor and driver kits