REDARC SBI12 Dual Battery Isolator vs Victron Energy Argofet 200-2AC Battery Isolator
These solve the same problem in different ways. The REDARC SBI12 is a solenoid isolator: it links the start and auxiliary batteries once the start battery reaches 13.2V and separates them at 12.7V, so accessories drain the aux battery and not the cranking battery. The Victron Argofet 200-2AC is a FET-based diode isolator: it lets one alternator or charger feed two banks at once with almost no voltage loss, but it never combines the batteries. Pick the REDARC for a 4WD, ute or boat with a single auxiliary battery and a 100A-or-less alternator. Pick the Victron for a twin-bank marine or vehicle setup with a bigger alternator that needs both banks charged while running. Owners rate the REDARC highly for build and reliability; Victron's Argofet is respected for efficiency but is a fixed two-output device with no smart logic.
- Choose the REDARC SBI12 if you want a self-contained smart isolator that charges an auxiliary battery and automatically links or separates it from the start battery, and your alternator is rated 100A or less.
- Choose the Victron Argofet 200-2AC if you have two battery banks fed by one alternator or charger and want near-zero voltage drop with no automatic combining logic.
Prices
- REDARC SBI12 Dual Battery Isolator: $104.00 at Elevate Auto (checked today)
- Victron Energy Argofet 200-2AC Battery Isolator: $119.85 at American Diving Supply (checked today)
- Difference: the REDARC SBI12 Dual Battery Isolator is $15.85 cheaper than the Victron Energy Argofet 200-2AC Battery Isolator today

