SawStop Contractor Saw vs SKILSAW SPT99-11
Buy the SawStop Contractor Saw if safety is the priority or anyone inexperienced will use the saw. Its flesh-sensing brake stops the blade in under 5 milliseconds, and no other saw here offers that. Buy the SKILSAW SPT99-11 if you cut sheet goods and framing lumber all day and want worm-drive torque for far less money. As of November 4, 2026, the SawStop is $2,249.00 at The Home Depot and the SKILSAW is $648.00 at Walmart, a gap of about $1,600.
Today the SKILSAW SPT99-11 costs $1,601.00 less at its best price.
Ask our shopping agent
SawStop Contractor Saw
5Choose the SawStop Contractor Saw if you want the finger-saving brake, a smoother 1.75 HP induction motor, and a 52-inch T-Glide fence, and you can spend $2,249.00 at The Home Depot as of November 4, 2026.
- Flesh-sensing brake is the only real defense against a serious blade injury on this list
- Quiet, low-vibration 1.75 HP induction motor leaves glue-ready edges
- 52-inch T-Glide fence option gives the widest rip capacity of the two
- Left-tilt blade is easier to control when beveling
What separates them
| SawStop Contractor Saw | SKILSAW SPT99-11 | |
|---|---|---|
| Safety brake | SawStop system stops the blade on skin contact in under 5 ms | Anti-kickback device only; no flesh-sensing brake |
| Motor | 1.75 HP TEFC induction, 14 A, 120 V, 4000 rpm | 4.4 HP worm drive, 15 A, 120 V, 5000 rpm |
| Depth of cut | 3 1/8 in at 90 degrees | 3 5/8 in at 90 degrees |
| Rip capacity | 36 in standard, 52 in with T-Glide fence option | 30 1/2 in with rack-and-pinion fence |
| Bevel range | 0 to 45 degrees left tilt | -1 to 47 degrees |
| Weight and portability | About 35 lbs saw unit; cast iron wings add weight; no stand included | 98.8 lbs with rolling stand and 16-inch wheels |
| Noise and cut finish | Belt-driven induction motor runs quieter with less vibration |
Price history
- SawStop Contractor Saw: lowest $2,235.00 on Nov 4 at Beaver Industrial Supply.
- SKILSAW SPT99-11: lowest $648.00 on Nov 1 at Walmart; $648.00 on Nov 4.
Prices at every store
SawStop Contractor Saw
- The Home DepotNew
In stock
$2,249.00Free shippingObserved at 1:58 AM
Also available at
- Beaver Industrial SupplyCheck price at Beaver Industrial Supply
- eBayCheck price at eBay
- ZoroCheck price at Zoro
SKILSAW SPT99-11
- WalmartNew
In stock
$648.00Free shippingObserved at 2:34 AM - ZoroNew
Availability unknown
$916.99Observed at 2:34 AM - eBayNew
Availability unknownSold by toolup
$958.48Verified
Also available at
- eBayCheck price at eBay
- AmazonCheck price at Amazon
Specs compared
| Spec | SawStop Contractor Saw | SKILSAW SPT99-11 |
|---|---|---|
| Material Compatibility | Wood | Plywood |
| Cutting Material | Wood | Plywood |
| Safety Highlights | SawStop Safety System stops on contact with skin | Anti-kickback device |
| Weight | 35 lbs (optional cast iron wings, each) | 98.8 lbs |
| Power Source | Corded Electric | Corded Electric |
| Cordless | No | No |
| Voltage | 120v (user config. to 220v with optional kit) | 120 V |
| Electric Current | 14 A | 15 A |
| Cutting Capacity | 52" (rip capacity) | 30-1/2 inch (rip capacity) |
| Cutting Depth |
What reviewers say
SawStop Contractor Saw
Owners buy it for the brake and generally report it works as advertised, including on hot dogs and accidental finger contact. The common complaints are price, the cost of a fired cartridge plus blade, and false trips on damp or metallic stock.
- Brake fires reliably and saves fingers
- Fence stays square and locks firmly
- Smooth, quiet motor for its class
- Solid cut quality on hardwoods
- Expensive to buy and to own
- False trips on wet or conductive material
- Heavy and awkward to move without a base
- Assembly and alignment take time
SKILSAW SPT99-11
With 4.6 out of 5 from 587 ratings, owners largely back the saw's power and fence. Complaints center on weight and setup.
Questions and answers
- Which is better for a home workshop?
- The SawStop. The brake protects occasional users who are out of practice, and the quieter induction motor suits a garage. The SKILSAW's weight and noise fit job sites better than a small shop.
- Is the SawStop worth $1,600 more?
- If you value the brake, yes. A single blade-contact injury costs far more than the price gap, and the SawStop also cuts cleaner and quieter. If you only cut plywood and never work near the blade, the SKILSAW does the job for $648.00 at Walmart as of November 4, 2026.
- Which has more power?
- The SKILSAW. Its 4.4 HP worm-drive motor and 3 5/8-inch depth of cut beat the SawStop's 1.75 HP and 3 1/8 inches. The SawStop trades power for smoothness and safety.
- Which is easier to move around?
- The SKILSAW, despite weighing 98.8 lbs, because it comes with a rolling stand and 16-inch wheels. The SawStop is lighter as a unit but has no stand, so you lift it.
- Can the SawStop rip wide sheet goods?
- Yes, with the 52-inch T-Glide fence option. The base configuration gives 36 inches, still more than the SKILSAW's 30 1/2 inches.
- Do both cut dados?
- The SKILSAW lists a 1/2-inch dado capacity. The SawStop Contractor Saw accepts a dado stack with the appropriate brake cartridge and throat plate.
More comparisons
- SKILSAW SPT99-11 vs SawStop Jobsite Saw Pro JSS-120A60
- SawStop Contractor Saw vs SawStop Jobsite Saw Pro JSS-120A60
- DeWALT Corded 10-in. Table Saw With Scissor Stand (DWE7491X) vs SKILSAW SPT99-11
- SawStop Contractor Saw vs BOSCH 10 In. Worksite Table Saw
- SKILSAW SPT99-11 vs Bosch 4100XC-10
- SKILSAW SPT99-11 vs BOSCH 10 In. Worksite Table Saw