SKILSAW SPT99-11 vs BOSCH 10 In. Worksite Table Saw
Buy the SKILSAW SPT99-11 if you cut sheet goods and need long rips; its 30-1/2 inch rip capacity and 3-5/8 inch depth of cut beat the Bosch's 8.5 inch left rip and 3-1/8 inch depth. Buy the Bosch 4100XC-10 if you want a lighter, smoother-starting worksite saw with an electric brake and restart protection. The SKILSAW is $648.00 at Walmart as of November 4, 2026; the Bosch is $586.05 at The Home Depot as of the same date.
Today the BOSCH 10 In. Worksite Table Saw costs $61.95 less at its best price.
Ask our shopping agent
SKILSAW SPT99-11
4.6Choose the SKILSAW SPT99-11 if you break down plywood and 4x stock and want the widest rip capacity and deepest cut in this pair.
- 30-1/2 inch rip capacity handles full sheets with room to spare.
- 3-5/8 inch depth of cut slices 4x in one pass.
- 5,000 rpm and 4.4 HP worm drive motor for hard ripping.
- Rack and pinion fence adjusts quickly and stays square.
What separates them
| SKILSAW SPT99-11 | BOSCH 10 In. Worksite Table Saw | |
|---|---|---|
| Rip capacity | 30-1/2 inches | 8.5 inches (left of blade) |
| Depth of cut at 90 degrees | 3-5/8 inches | 3-1/8 inches |
| Blade speed | 5,000 rpm | 3,650 rpm |
| Motor | 4.4 HP, 15A, Dual-Field worm drive | 4.0 max HP, 15A, worm drive |
| Weight | 98.8 lbs | 94 lbs |
| Soft start and electric brake | Not listed | Soft-start, Constant Response, restart protection, electric brake |
| Bevel range | -1 to 47 degrees | -2 to 47 degrees |
Price history
- SKILSAW SPT99-11: lowest $648.00 on Nov 1 at Walmart; $648.00 on Nov 4.
- BOSCH 10 In. Worksite Table Saw: lowest $586.05 on Nov 4 at The Home Depot.
Prices at every store
SKILSAW SPT99-11
- WalmartNew
In stock
$648.00Free shippingObserved at 2:34 AM - ZoroNew
Availability unknown
$916.99Observed at 2:34 AM - eBayNew
Availability unknownSold by toolup
$958.48Verified
Also available at
- eBayCheck price at eBay
- AmazonCheck price at Amazon
BOSCH 10 In. Worksite Table Saw
- The Home DepotNew
In stock
$586.05Free shippingObserved at 1:57 AM - Original Repair PartsNew
In stock
$753.95+ $12.99 shippingObserved at 1:57 AM
Also available at
Specs compared
| Spec | SKILSAW SPT99-11 | BOSCH 10 In. Worksite Table Saw |
|---|---|---|
| Blade Diameter | 10 inches | 10 in |
| Material Compatibility | Plywood | Fine materials, Rough materials |
| Cutting Material | Plywood | Fine materials, Rough materials |
| Weight | 98.8 lbs | 94 lb |
| Power Source | Corded Electric | Corded Electric |
| Cordless | No | No |
| Voltage | 120 V | 120V |
| Power Highlights | With Stand | With Stand |
| Electric Current | 15 A | Single Phase |
| Anti-Kickback | Yes | Yes |
What reviewers say
SKILSAW SPT99-11
With 4.6 out of 5 from 587 ratings, owners largely back the saw's power and fence. Complaints center on weight and setup.
- Strong torque through wet or thick lumber
- Fence stays accurate after repeated adjustments
- Stand rolls well on jobsites
- Heavy and awkward to load alone
- Assembly and fence alignment take time out of the box
- Dust collection is only partly effective
BOSCH 10 In. Worksite Table Saw
Owners of the 4100 series generally rate it as one of the better-built jobsite saws, with the fence and motor soft start getting the most praise. Complaints center on weight and on the small rip capacity for full sheets.
- Fence stays square after repeated moves
Questions and answers
- Which is better for cutting plywood sheets?
- The SKILSAW SPT99-11. Its 30-1/2 inch rip capacity and 3-5/8 inch depth of cut let you rip full sheets and stack-cut plywood; the Bosch's 8.5 inch left rip needs a track saw or circular saw for full-sheet breakdown.
- Is the Bosch worth saving $62?
- Yes if you want soft start, an electric brake and restart protection on a 94 lb saw. No if you rip wide sheet goods, where the SKILSAW's extra rip capacity matters more than the savings.
- Which saw is easier to move around a jobsite?
- The Bosch at 94 lbs is about 5 lbs lighter. The SKILSAW has 16-inch wheels and a stand built for rolling over stairs and uneven ground, so it is easier to wheel despite the weight.
- Which has more power?
- The SKILSAW, at 4.4 HP and 5,000 rpm versus the Bosch's 4.0 max HP and 3,650 rpm. Both run on 120V, 15A circuits.
- Do both cut 4x material in one pass?
- Only the SKILSAW, at 3-5/8 inches depth of cut. The Bosch cuts 3-1/8 inches at 90 degrees, so 4x stock needs a flip or a different tool.
- Which has better safety features?
- The Bosch lists soft start, an electric brake and restart protection on top of anti-kickback. The SKILSAW lists anti-kickback only, so the Bosch has the edge on controlled stops.
More comparisons
- SKILSAW SPT99-11 vs SawStop Jobsite Saw Pro JSS-120A60
- DeWALT Corded 10-in. Table Saw With Scissor Stand (DWE7491X) vs SKILSAW SPT99-11
- SawStop Contractor Saw vs SKILSAW SPT99-11
- SKILSAW SPT99-11 vs Bosch 4100XC-10
- SawStop Jobsite Saw Pro JSS-120A60 vs BOSCH 10 In. Worksite Table Saw
- SawStop Contractor Saw vs BOSCH 10 In. Worksite Table Saw