Which is better for a daily-driven car with one sub?

The SCD2K.1. Its 200A draw works with a stock or lightly upgraded electrical system, while the Shock's 700A draw needs an alternator upgrade and lithium before SLAPZ will honor the warranty.

Is the Shock 8k.1D worth the extra $210?

Only if you need 8000W. The Shock adds 6000W at 1 ohm and dual 0 gauge inputs, but you will spend several hundred more on wiring, an alternator and battery to run it safely.

Can I strap either amp for more power?

No. SLAPZ lists the SCD2K.1 as cannot be strapped, and the Shock 8k.1D V2 lists no strapping support. Plan on one amp per sub stage.

Which handles low impedance better?

Both are 1 ohm stable and neither is 0.5 ohm stable. SLAPZ states that running the SCD2K.1 at 0.5 ohm will likely blow mosfets and voids the warranty.

Which has better sound quality specs?

The Shock, on paper: above 105 dB signal-to-noise versus above 90 dB, and a wider 0-12 dB bass boost. Both are Class D sub amps, so the gap is mostly about noise floor at low volume.

What power do I get at 4 ohms?

2600W from the Shock 8k.1D V2 and 800W from the SCD2K.1. If your sub is a 4-ohm single voice coil, the Shock leaves far more headroom.

SLAPZ Audio Shock 8k.1D V2 Full Bridge 8000W mono block amplifier vs SLAPZ Audio SCD2K.1 Mono Block Amplifier

Buy the Shock 8k.1D V2 only if you are building a competition-level sub stage and will also fund the electrical to feed it: 1/0 OFC wiring, lithium or a big AGM bank, and an upgraded alternator. For almost every other shopper, the SCD2K.1 is the smarter buy: 2000W at 1 ohm, a 200A draw, and a 1-year warranty for $159.99 at SLAPZ as of October 28, versus $369.99 for the Shock at SLAPZ as of October 28. The Shock costs more than twice as much and still needs hundreds more in supporting parts before it is safe to run.

Ask our shopping agent