Which is better for leatherworking?

The VEVOR is the common pick for leather because it is cheap and buyers report it works well for that. The Palmgren also handles it, but you pay much more for capacity you may not need.

Is the Palmgren worth the extra money?

Yes if you press metal or use it often. The larger anvil, 4 in throat and 18.0:1 lever ratio make it more capable, and buyers do not report the arrival damage common with the VEVOR.

The Palmgren is the safer bet. Its heavier cast iron body and bigger bearing surfaces suit repeat use, while VEVOR buyers report rust and damage out of the box.

Can the VEVOR handle 1 ton?

Both are rated at 1 ton. The VEVOR's lighter 24.47 lb frame flexes more under full load, so keep heavy pressing to the Palmgren.

Which has more room for workpieces?

The Palmgren, with a 4 in throat and 4-3/8 in anvil. The VEVOR's insertion space is reported as too narrow for some tools, though its 5.9 in work height is taller.

Do either include tooling?

The VEVOR includes flat, pointed and round punch molds. The Palmgren listing includes no tooling, so budget for punches separately.

VEVOR 1 Ton Manual Arbor Press vs Palmgren 9661101 Arbor Press

Buy the VEVOR if you want a light 1-ton press for leatherwork, small stamping or bending and you want to spend about $53. Buy the Palmgren if you need a heavier, more rigid press with a bigger anvil and throat for metalworking and repeat use; it costs $218.56 at MRO Supply as of November 6, 2026, roughly four times the VEVOR's $52.99 at eBay. The Palmgren is the better-built tool, but the VEVOR is the better value for occasional light jobs.

Today the VEVOR 1 Ton Manual Arbor Press costs $165.57 less at its best price.

Ask our shopping agent

It checks today's price at every store, compares the alternatives and answers in about a minute.