Which is better for printing on tumblers and bottles?

The SHUNJITAI, because it prints on cylinders directly. The xTool O1 Omni is flatbed only, so you would print UV DTF transfers and apply them to curved items.

Is the xTool O1 Omni worth the price?

At $2,249.00 at Swing Design as of November 3, 2026, it is the cheaper of the two and the only one with a stated print area, printhead and 7 mm texture. If you need flat-bed UV work with white ink and varnish, it is the safer buy.

Which has the larger print area?

The xTool states 13" × 16.5" (330 × 420 mm). The SHUNJITAI does not publish a print area, so you cannot compare sizes on paper.

Can either print white ink?

Both can. The xTool uses CMYK plus one white channel and varnish; the SHUNJITAI uses CMYK plus two white channels.

Which is better for 3D texture and special effects?

The xTool. It lists raised texture up to 7 mm and gold foil effects. The SHUNJITAI lists neither.

Neither maker publishes a duty cycle or head life figure, so there is no honest answer. The xTool names its Epson F1080 head, which makes replacement easier to source.

xTool O1 Omni Single Head UV DTF & Direct To Object 3D-Texture Printer vs Multifunctional Desktop UV Printer, Flat and Cylindrical Two-in-One, 6-Color CMYK+WW Ink, Infrared Height Sensor, for Small Storefront Personalized Gift DIY

Buy the xTool O1 Omni Single Head if you want a documented desktop UV printer with a 13" × 16.5" bed, 7 mm raised texture, white ink and varnish, and a known printhead. The SHUNJITAI two-in-one is the pick only if printing on cylinders matters more than everything else. The xTool is $2,249.00 at Swing Design as of November 3, 2026; the SHUNJITAI has no store price listed, only a daily low of $3,062.99 from October 30, 2026.

Ask our shopping agent