Can the ZC-10 replace the GrabberPRO?

No. The ZC-10 is a throat plate insert for specific Harvey saws. The GrabberPRO is a push block you hold. They do different jobs and you can use both on the same saw.

Will the ZC-10 fit my table saw?

Only if it is a Harvey Ambassador C300-30, C300-50 or an Alpha series saw. It is made for those models and will not fit other brands.

Which one makes my cuts cleaner?

The ZC-10, because it closes the gap around the blade and reduces splintering on veneer and plywood. The GrabberPRO improves control and safety, not cut finish.

The GrabberPRO has no wear part and should outlast the ZC-10. The ZC-10's zero clearance slot wears with use and cannot be replaced on its own.

Do I need a second ZC-10 for bevel cuts?

Yes. Owners note that 45° and other angle cuts need their own insert, since the blade would widen the zero clearance slot.

ZC-10 Zero Clearance Insert vs Milescraft 3406 GrabberPRO

These are not competing products. The ZC-10 is a zero clearance insert that replaces the throat plate on Harvey Ambassador C300-30/C300-50 and Alpha table saws, so it only fits those saws. The Milescraft 3406 GrabberPRO is a push block that holds workpieces on table saws, band saws, jointers and router tables. Buy the ZC-10 if you own one of those Harvey saws and want splinter-free cuts. Buy the GrabberPRO if you want safer, steadier hands near any blade. Owners rate the ZC-10 highly for fit and its nylon set screws, but note it wears and needs a separate insert for angle cuts.

Choose the ZC-10 if you own a Harvey Ambassador C300-30, C300-50 or Alpha table saw and want a manufacturer-fit insert that cuts down tearout on veneer and plywood.
Choose the Milescraft GrabberPRO if you want a push block with interchangeable legs and a retractable heel to keep your hands clear on a table saw, band saw, jointer or router table.

Prices

ZC-10 Zero Clearance Insert: $79.00 at Harvey Woodworking (last seen Nov 9)
Milescraft 3406 GrabberPRO: $16.75 at eBay (last seen Nov 9)
Difference: the Milescraft 3406 GrabberPRO is $62.25 cheaper than the ZC-10 Zero Clearance Insert at the latest prices (Nov 9)

	ZC-10 Zero Clearance Insert	Milescraft 3406 GrabberPRO
What it is	A throat plate insert for the saw	A push block for feeding stock
Saw compatibility	Only Harvey Ambassador C300-30/C300-50 and Alpha saws	Table saws, band saws, jointers and router tables
Job it does	Closes the gap around the blade to reduce splintering	Holds and guides the workpiece with your hands away from the blade
Build	Aluminum with a red anodized face and nylon side set screws	TPE body with diamond grip and four interchangeable legs
Adjustability	Side screws align the insert and return it to the same position after removal	Legs swap between 1/8", 1/4", 1/2" and 1", plus an angled support foot
Angle cuts	Needs a second insert for 45° and other bevels	Works at any blade angle
Wear	The zero clearance slot wears and cannot be replaced on its own	No wear part to replace; the heel retracts
Owner feedback	4.9 of 5 from 46 ratings; praised for exact fit and splinter-free cuts	Widely used shop staple; no comparable rating given here

Spec	ZC-10 Zero Clearance Insert	Milescraft 3406 GrabberPRO
Application	—	Holding workpiece in place
Compatible Tool Type	—	Table Saws, Band saws, Jointers, Router tables
Compatible With	—	Table Saws, Band saws, Jointers, Router tables
Length	—	10″
Weight	—	2.25 lb
Depth	—	11.3 in
Width	—	5.53″ (with support foot)
Handle Type	—	Angled handle
Grip Type	—	Diamond grip, Max grip
Set Included Components	—	Four adjustable, interchangeable legs
Set Size	—	1
Skill Level	—	Professional

Spec	ZC-10 Zero Clearance Insert	Milescraft 3406 GrabberPRO
Typical Users	—	Adult
Accessory Type	—	Push Block
Included Accessories	—	Support Foot, 1/2” Leg, 1/4” Leg, 1/8” Leg, 1” …
Angle	—	Angled (support foot)
Color	—	Black
Overall Material	—	TPE material

ZC-10 Zero Clearance Insert vs Milescraft 3406 GrabberPRO

Prices

ZC-10 Zero Clearance Insert vs Milescraft 3406 GrabberPRO

Prices

ZC-10 Zero Clearance Insert

Milescraft 3406 GrabberPRO

What separates them

Price history

Prices at every store

ZC-10 Zero Clearance Insert

Milescraft 3406 GrabberPRO

Specs compared

What reviewers say

ZC-10 Zero Clearance Insert

Questions and answers

Ask our shopping agent

Buying guides that pick them