Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is 10-gauge, 4-conductor non-metallic sheathed cable with a bare ground, rated 600V and 30 amps. It is solid copper NM-B for dry indoor branch circuits, typically feeding a 240V appliance or subpanel that needs two hots, a neutral and a ground. The four-conductor build is what sets it apart from common 10/2 and 10/3 NM-B, which lack the extra neutral or conductor. Electricians use it where a circuit needs both 120V and 240V legs, such as a range or dryer on a 30-amp circuit.
In stockReturn policy
This is 10/4 with ground NM-B nonmetallic-sheathed copper building wire, rated for 600 volts and 30 amps. It has four insulated conductors plus a bare ground wire. That makes it suitable for circuits that need multiple hots and a neutral, such as multi-wire branch circuits and split-phase 240V loads with a neutral.
It is used in residential wiring for branch circuits, outlets, switches and lighting. It also serves small appliances such as microwave ovens, dishwashers and garbage disposals, and HVAC systems. It can be run in air voids of masonry block or tile walls that are not wet or damp. It can be used for exposed and concealed work in normally dry indoor locations, at temperatures up to 90°C. Ampacity is limited to that for 60°C conductors. The cable is designed for easier pulling during installation.
The conductors are soft solid bare annealed copper with PVC insulation. The jacket is PVC.
