What saws does this blade fit?

It has a 10-inch diameter and a 5/8-inch arbor, the common size for 10-inch table saws and miter saws. Check your saw's arbor size and maximum blade diameter before mounting it.

Is 80 teeth good for ripping?

No. An 80-tooth blade is made for smooth crosscuts and finish work. For ripping thick stock, a blade with fewer teeth and deeper gullets clears chips faster.

Can the blade be resharpened?

Yes, the carbide teeth can be resharpened by a saw service. That restores a dull edge instead of forcing you to buy a new blade.

Will it cut plywood without chipping?

The fine 80-tooth geometry is designed for clean cuts with little chipping, which suits plywood, veneer and trim. A zero-clearance throat plate on your saw further reduces tear-out.

What thickness is the blade plate?

The plate is listed at 2.0 mm. That is a standard kerf rather than a thin-kerf blade, so expect your saw to work a little harder in dense wood.

ATE Pro

10" 80 Tooth Carbide Tip Wood Tipped Circular Round Power Saw Blade

Best price now

$24.99at WalmartChecked Nov 12

Prices are checked against each store and labelled with when.

Visit Walmart

ATE Pro

10" 80 Tooth Carbide Tip Wood Tipped Circular Round Power Saw Blade

Best price now

$24.99at WalmartChecked Nov 12

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $24.99 at Walmart on Nov 12.

Our take on the 10" 80 Tooth Carbide Tip Wood Tipped Circular Round Power Saw Blade

This is a 10-inch circular saw blade with 80 carbide teeth and a 5/8-inch arbor, built for smooth, clean cuts with little chipping. The high tooth count makes it a fine-finish blade for crosscuts and trim work rather than fast ripping or framing. It can be resharpened, which extends its life compared with disposable blades. It suits woodworkers who want clean edges on plywood, molding and finish cuts, though it is not the blade for nail-embedded lumber or heavy demolition.

Best forFinish crosscuts in plywood and hardwoodTrim, molding and cabinet workTable and miter saw owners wanting clean edgesShoppers who prefer a resharpened blade over a throwaway one

Pros

80 teeth give a fine, smooth cut with limited chipping
Carbide tips hold an edge longer than steel teeth
Resharpenable, so it can be restored rather than replaced
Standard 5/8-inch arbor fits most 10-inch saws
2.0 mm plate is stiff enough for clean finish cuts

Cons

High tooth count cuts slowly in thick stock
Not suited to ripping or framing lumber
Carbide tips can chip if the blade hits nails or grit
No thin-kerf design, so it takes more power from the saw

10" 80 Tooth Carbide Tip Wood Tipped Circular Round Power Saw Blade prices at every store

WalmartNew
In stockSold by HZ TESCOReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$24.99Free shippingChecked Nov 12
Visit Walmart

About the 10" 80 Tooth Carbide Tip Wood Tipped Circular Round Power Saw Blade

This is a 10-inch carbide-tipped circular saw blade with 80 teeth. It is made for smooth, clean cuts without chipping.

The blade has a 5/8 inch arbor and a thickness of 2.0. It can be resharpened. The manufacturer's look and details may vary.

Diameter: 10"
Teeth: 80
Tip type: Carbide tipped
Arbor: 5/8
Thickness: 2.0
Resharpenable: Yes
Brand: ATE Pro

Specifications

size: 10\"Source

Questions and answers

What saws does this blade fit?: It has a 10-inch diameter and a 5/8-inch arbor, the common size for 10-inch table saws and miter saws. Check your saw's arbor size and maximum blade diameter before mounting it.
Is 80 teeth good for ripping?: No. An 80-tooth blade is made for smooth crosscuts and finish work. For ripping thick stock, a blade with fewer teeth and deeper gullets clears chips faster.
Can the blade be resharpened?: Yes, the carbide teeth can be resharpened by a saw service. That restores a dull edge instead of forcing you to buy a new blade.
Will it cut plywood without chipping?: The fine 80-tooth geometry is designed for clean cuts with little chipping, which suits plywood, veneer and trim. A zero-clearance throat plate on your saw further reduces tear-out.
What thickness is the blade plate?: The plate is listed at 2.0 mm. That is a standard kerf rather than a thin-kerf blade, so expect your saw to work a little harder in dense wood.
Where is the 10" 80 Tooth Carbide Tip Wood Tipped Circular Round Power Saw Blade cheapest?: At Walmart, for $24.99, as of our latest check.
What do buyers say about the 10" 80 Tooth Carbide Tip Wood Tipped Circular Round Power Saw Blade?: Rated 5 out of 5 from 2 ratings.

More circular saw blades

JABETC Fine Carbide Tip Tipped Miter Saw Blade 80 Tooth 10 Inch

EDiamondTools 10" Segmented Diamond Saw Blade for Concrete, Brick, Block and Masonry

CMT USA 221.060.10 ITK Industrial 10 Inch 60 Tooth Fine Finish Saw Blade

King 4 diamond continuous-rim circular saw blade