Black FridayDealsBuying guidesBrandsStoresTermsPrivacydeal.ai apps

© Deal.ai Inc.

Deal.ai
1
10 Inch 5000RPM Table Saw with Stand

10 Inch 5000RPM Table Saw with Stand

Last price we saw

$246.99at Target, last seen Nov 1

Prices change often: ask the agent below to check today's price at every store.

Prices are checked against each store and labelled with when.

Ask our shopping agent

Enter to send, Shift+Enter for a new line

Our take on the 10 Inch 5000RPM Table Saw with Stand

This is a 10-inch benchtop table saw rated at 5,000 RPM, drawing 15 amps from a standard 120V outlet, and sold with a folding stand. The 15-amp draw is the practical ceiling for a household circuit, so it needs a dedicated outlet or a circuit without other heavy loads. The 5,000 RPM no-load speed is on the high side for a 10-inch saw, which helps on softwoods and thin stock. No battery means corded only, so plan the outlet before you set up the stand.

Best forHome woodworkers cutting framing lumber and shelvingJobsite work where a folding stand mattersRipping boards up to 3 inches thick in softwoodBuyers who want one saw and stand in a single purchase
Pros
  • 10-inch blade handles common dimensional lumber
  • 5,000 RPM no-load speed suits softwood and plywood
  • 15 amps gives usable power on a 120V household circuit
  • Folding stand included, so no separate base to buy
  • Corded power means no battery swaps mid-cut
Cons
  • 15 amps can trip a shared household circuit under load
  • No battery option, so it is tethered to an outlet
  • Benchtop class: fence and table are smaller than a cabinet saw's
  • High RPM does not replace torque in thick hardwood
  • Stand adds weight and setup time for small jobs

10 Inch 5000RPM Table Saw with Stand prices at every store

  • TargetCheck price at Target

10 Inch 5000RPM Table Saw with Stand price history

Lowest price we've seen: $246.99 on Nov 1 at Target. Tracked across 1 store since Nov 1.

Specifications

Amps Required
15 amps
Power Source
Electric
Battery
No Battery Used

Questions and answers

Is 15 amps enough for a 10-inch table saw?
It is the standard draw for contractor-class saws on 120V. It cuts softwood and plywood fine, but it can trip a breaker if the circuit also runs a shop vac or heater. Use a dedicated 20-amp circuit where possible.
Does the 5,000 RPM speed matter?
Higher blade speed gives cleaner cuts in softwood and thin stock. It does not make up for low torque in thick hardwood, so feed rate still matters.
Can I use it without the stand?
Yes. It is a benchtop saw, so it can sit on a workbench. The included stand mainly helps with portability and working height.
What blade size and arbor does it take?
It takes a 10-inch blade, the most common size, so blades are easy to find. Check the arbor size on the saw before buying a replacement blade.
When is the price likely to be lowest?
Table saws and combo kits tend to drop around major holiday sales and during spring building season promotions. Compare the saw-alone price too, since the stand is part of what you pay for.