What can the 10-inch blade cut through?

The saw is rated for wood, aluminum and PVC. The included 80-tooth carbide blade gives cleaner cuts in trim and molding; for thick aluminum, use a blade rated for metal.

Does it bevel both ways?

No. The bevel range is 0 to 45 degrees on one side, so angled cuts lean one direction only. Miter adjustment covers 0 to 45 degrees as well.

Can it crosscut wide boards?

It is a fixed-head compound saw with no sliding rails, so cut width is limited by the 10-inch blade and the table. Wide shelving and stair stringers need a sliding saw.

What comes in the box?

The saw with its 80-tooth TCT blade. No stand, material clamp or dust collection is listed, so plan on adding a clamp for repeatable trim cuts.

Does it need a special outlet?

It runs on standard US 110V/60Hz power with a US plug. The 1600W draw is within a normal 15-amp household circuit.

Is it good for a first miter saw?

Yes, if your work is trim, molding and framing on narrower stock. It gives compound capacity and a carbide blade at an entry level, but lacks the sliding reach and dual-bevel range of pro saws.

Where is the 10-inch Compound Miter Saw cheapest?

At Walmart, for $119.99, as of our latest check.

What do buyers say about the 10-inch Compound Miter Saw?

Rated 5 out of 5 from 1 ratings.

Topteng

10-inch Compound Miter Saw

Best price now

$119.99at WalmartChecked Nov 12

Prices are checked against each store and labelled with when.

Visit Walmart

Topteng

10-inch Compound Miter Saw

Best price now

$119.99at WalmartChecked Nov 12

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $119.99 at Walmart on Nov 12.

Our take on the 10-inch Compound Miter Saw

The Topteng 10-inch compound miter saw is a corded bench saw with a 1600W (2.1 HP) copper-core motor and a 6000 RPM no-load speed. It cuts miters and bevels from 0 to 45 degrees and ships with an 80-tooth carbide-tipped blade, aimed at trim work, framing and general woodworking. Against name-brand 10-inch sliders it is a simpler fixed-head design with no sliding rails, so it suits crosscuts and trim on narrower stock rather than wide boards. It is a budget-tier tool for buyers who want compound capacity without paying for a pro-grade brand.

Best forTrim carpenters cutting baseboard and crown moldingFramers and woodworkers on light jobsDIYers setting up a first miter sawCutting aluminum and PVC trim

Pros

1600W motor with 6000 RPM no-load speed for fast cuts
Compound capacity: miter and bevel 0 to 45 degrees
80-tooth TCT blade included
Cuts wood, aluminum and PVC
Compact fixed-head build, easier to store than a slider

Cons

No sliding rails, so crosscut width is limited to the blade and table
Single-bevel design, so bevel cuts go one way only
No laser or LED cut line listed
No stand, clamp or dust bag mentioned
Budget brand with limited track record for parts and service

10-inch Compound Miter Saw prices at every store

WalmartNew
In stockSold by Topteng X JIMIHOMEReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$119.99Free shippingChecked Nov 12
Visit Walmart

About the 10-inch Compound Miter Saw

This 10-inch compound miter saw cuts wood, aluminum, and PVC. It is meant for framing, trim work, woodworking, and DIY projects.

A copper-core motor delivers 1600W (2.1 HP). The saw makes miter and bevel cuts from 0 to 45 degrees, which suits work such as baseboards, crown molding, and picture frames.

Blade diameter: 10 inches
Blade teeth: 80 TCT
Motor: Copper-core
Rated power: 1600W (2.1 HP)
Rated voltage: 110V / 60Hz, standard US plug
No-load speed: 6000 RPM
Bevel range: 0 to 45 degrees
Height: 15.4 inches (pin flat), 18.9 inches (cutting position)
Materials: Wood, aluminum, PVC

Questions and answers

What can the 10-inch blade cut through?: The saw is rated for wood, aluminum and PVC. The included 80-tooth carbide blade gives cleaner cuts in trim and molding; for thick aluminum, use a blade rated for metal.
Does it bevel both ways?: No. The bevel range is 0 to 45 degrees on one side, so angled cuts lean one direction only. Miter adjustment covers 0 to 45 degrees as well.
Can it crosscut wide boards?: It is a fixed-head compound saw with no sliding rails, so cut width is limited by the 10-inch blade and the table. Wide shelving and stair stringers need a sliding saw.
What comes in the box?: The saw with its 80-tooth TCT blade. No stand, material clamp or dust collection is listed, so plan on adding a clamp for repeatable trim cuts.
Does it need a special outlet?: It runs on standard US 110V/60Hz power with a US plug. The 1600W draw is within a normal 15-amp household circuit.
Is it good for a first miter saw?: Yes, if your work is trim, molding and framing on narrower stock. It gives compound capacity and a carbide blade at an entry level, but lacks the sliding reach and dual-bevel range of pro saws.
Where is the 10-inch Compound Miter Saw cheapest?: At Walmart, for $119.99, as of our latest check.
What do buyers say about the 10-inch Compound Miter Saw?: Rated 5 out of 5 from 1 ratings.