This is a loaded subwoofer package: a DS18 GEN-X104D 10" subwoofer mounted in a front-ported enclosure. The subwoofer has a total RMS power handling of 400W and a maximum of 800W.
The enclosure is built from 1/2" (15mm) MDF and finished in black carpet. It has an internal volume of 1.28 ft³ and a port tuned to 35Hz.
The subwoofer has a 2" voice coil on a black aluminum former. It uses dual 4-ohm voice coils wired in parallel, for a nominal impedance of 2 ohms. The cone is paper and fiberglass, the surround is foam, and the basket is steel.
- Speaker
- Single 10" subwoofer (GEN-X104D)
- Impedance
- 2 ohm total (dual 4-ohm voice coils, wired in parallel)
- RMS power
- 400W
- Max power
- 800W
- Sensitivity
- 90dB (1w/1m)
- Frequency response
- 25 - 250Hz
- Low-pass crossover
- 120Hz recommended
- Voice coil
- 2" / 50.8mm diameter, black aluminum former
- Winding
- SV
- Cone
- Paper and fiberglass
- Dust cap
- PPI
- Surround
- Foam
- Basket
- Steel
- Magnet
- Ferrite, 66 oz
- Box type
- Front ported
- Internal volume
- 36.3L / 1.3 ft³
- Port tune
- 35Hz
- -3dB point (F3)
- 29Hz
- Box material
- 1/2" / 15mm MDF
- Finish
- Black carpet
- Height
- 13.78" / 350mm
- Width
- 15.75" / 400mm
- Depth
- 11" / 280mm (depth 1); 14" / 356mm (depth 2)
- Uses
- Car audio, pro audio