
10 Set M8 x 30 mm Hex Chicago Screws Binding Posts Socket Cap Bolt Nut
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A 10-set pack of M8 x 30 mm Chicago screws: a hex socket cap bolt paired with a matching barrel nut, made from 45# carbon steel in black. The socket head takes an 18 mm hex key, the cap is 16 mm across, and the thread pitch is 1.25 mm at strength level 4.8. They are meant for joining leather, boards and furniture parts where you want a fastener you can tighten and remove again. Compared with plain rivets or wood screws, the bolt-and-barrel design lets you take the joint apart; the trade-off is a lower strength grade than hardened structural bolts.
In stockShips from Hong Kong SAR China · duties may applyReturn policy
These are hex socket cap Chicago screws, each a binding post made of a bolt and a nut that join two pieces together. The set contains 10 sets. They are made of 45# carbon steel in a black finish, with a strength level of 4.8.
The thread size is M8 x 30 mm, with a thread length of 30 mm (1.18 inch) and a thread pitch of 1.25 mm (0.05 inch). The threaded hole diameter is 8 mm (0.31 inch), and the posts fit a 3/8 inch (10 mm) hole. The socket measures 18 x 10 mm (0.71 x 0.39 inch) in length and outer diameter, and the cap diameter is 16 mm (0.63 inch). The hex socket head and clear threads are made for tightening and removing without slipping.
To use them, pre-drill holes in the two objects being connected, insert the bolt and nut, and tighten with a screwdriver. The locked object's thickness must be less than the length of the screw plus the nut rod, or it will not tighten. They are used for leather crafting, garment construction, photo albums, scrapbooks, leather bags, furniture such as beds, tables, chairs, workbenches, boards, cabinets and cupboards, and for joining wooden boards.
