This is a 10W rigid solar panel with monocrystalline silicon cells and a toughened glass surface. It has 36 cells and a white back film. The panel is not foldable or flexible.
The junction box has an IP67 waterproof design with a bypass diode, and the circuit includes overcharge and reverse current protection. The panel outputs through a 2 m MC4 connector wire.
It is a solar module and is meant to be used with a controller and a battery. It can be used in homes, camping, RVs, yachts, street lights, water pumps and solar power stations.
- Max power
- 10W (Pmax), output tolerance ±3%
- Cell type
- Monocrystalline silicon, 36 cells
- Cell efficiency
- 19.5%
- Module efficiency
- 19.1%
- Open circuit voltage
- 21.6V (Voc)
- Short circuit current
- 0.61A (Isc)
- Max power voltage
- 18V (Vmp)
- Max power current
- 0.55A (Imp)
- Max system voltage
- 1000V DC
- Test conditions
- Irradiance 1000 W/m², temperature 25°C, AM 1.5
- Operating temp (NOCT)
- 45±2°C
- Temperature range
- -40°C to +80°C
- Surface
- Toughened glass
- Back film
- White
- Size
- 325 x 280 x 17 mm or 290 x 275 x 17 mm
- Weight
- 1100 g
- Output port
- 2 m MC4 connector wire
- Waterproofing
- Yes; IP67 junction box
- Certification
- CE, FCC, RoHS
- Used for
- Home, car, RV, yachts, camping, street lights, water pumps
- In the box
- 1 x 10W glass solar panel; or the panel plus a 10A 12V/24V controller and a 2 m PV connector cable set with alligator clip