Black FridayDealsBuying guidesBrandsStoresTermsPrivacydeal.ai apps

© Deal.ai Inc.

Deal.ai
#
#12 x 1-1/4 inch Zinc Slotted Flat Head Wood Screws Wsfs-395, 36 pcs

#12 x 1-1/4 inch Zinc Slotted Flat Head Wood Screws Wsfs-395, 36 pcs

Last price we saw

$17.98at Walmart, last seen Nov 2

Prices change often: ask the agent below to check today's price at every store.

Prices are checked against each store and labelled with when.

Ask our shopping agent

Enter to send, Shift+Enter for a new line

Our take on the #12 x 1-1/4 inch Zinc Slotted Flat Head Wood Screws Wsfs-395, 36 pcs

This is a 36-piece pack of #12 x 1-1/4 inch wood screws with slotted flat heads and a zinc finish. The #12 gauge is a heavy screw for its short length, so it suits thick stock and high-load joints rather than trim. Slotted heads need a flathead driver and are less forgiving than Phillips or Torx. No price was provided for this listing, so check the current price against other packs of the same size before buying.

Best forBuilding outdoor projects that need rust protectionFastening thick boards and heavy lumber joints
Buyers who prefer slotted flathead screws
Restoring or matching older hardware
Pros
  • Zinc coating resists rust better than plain steel
  • Flat head sits flush or countersinks cleanly
  • #12 gauge gives strong holding power in softwood and hardwood
  • 36 pieces covers a small project without a second trip
  • Slotted drive works with a common flathead screwdriver
Cons
  • Slotted heads cam out easily and slow down driving
  • Short 1-1/4 inch length limits use to thin stock or lap joints
  • Zinc is not rated for prolonged saltwater or ground contact
  • No driver bit included
  • Small pack size may not cover a large deck or framing job

#12 x 1-1/4 inch Zinc Slotted Flat Head Wood Screws Wsfs-395, 36 pcs prices at every store

  • WalmartCheck price at Walmart

#12 x 1-1/4 inch Zinc Slotted Flat Head Wood Screws Wsfs-395, 36 pcs price history

Lowest price we've seen: $17.98 on Nov 2 at Walmart. Tracked across 1 store since Nov 2.

Specifications

Hardware Screw Type
Wood
Finish
Zinc
Rec. Use
Wood

Questions and answers

Are these screws strong enough for deck boards?
The #12 gauge is sturdy, but the 1-1/4 inch length is short for decking over joists. Use longer screws for structural deck work and save these for thinner boards or face fastening.
Will zinc screws rust outdoors?
Zinc coating slows rust but is not a marine or ground-contact rating. For fences, planters or coastal projects, stainless steel or hot-dip galvanized screws last longer.
What driver do I need for the slotted head?
A flathead screwdriver that matches the slot width. A driver that is too narrow will slip and chew the slot, so pick one that fills it.
Do these work in hardwood?
Yes, but drill pilot holes first. Hardwoods like oak can split or snap a #12 screw without a pilot hole, especially near board edges.
What is in the box?
36 zinc-plated #12 x 1-1/4 inch slotted flat head wood screws. No driver bit or anchors are included.
When is the best time to buy them?
Small hardware packs rarely go on deep discount. Compare the per-screw price across stores and buy when a pack lands below the usual per-piece cost.