
12V 100W Oil Transfer Pump – 1–4 L/min Portable Engine Oil Extractor for DIY Maintenance
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
A compact 12V electric pump that pulls old engine oil out through the dipstick tube, so you can change oil from above instead of crawling under the car. It runs on a 100W motor and moves oil at roughly 1–4 L/min, which is slower than a shop extractor but fine for a single sump. It suits DIYers with a dipstick-accessible engine who want a cleaner, no-jack oil change. Against manual vacuum extractors it saves pumping by hand; against larger pneumatic or 110V extractors it is slower and holds less waste oil.
In stockReturn policy
This is a compact 12V electric pump for extracting old engine oil from above rather than through the bottom drain plug. It is built for routine DIY vehicle maintenance and connects to a compatible 12V power source with battery clips.
The pump has a 100W motor and a rated flow range of 1–4 L/min, with a listed work cycle of 30 minutes. The inlet hose feeds into an accessible oil extraction tube, and the outlet hose directs used oil into a suitable waste-oil container.
It is intended for compatible vehicles with an accessible oil extraction point, and can also be used for fluid-transfer tasks on motorcycles and small-engine equipment such as lawn mowers. Actual transfer speed varies with fluid viscosity, fluid temperature, hose setup and extraction height; warm oil generally flows more easily than cold, thick oil.
It checks today's price at every store, compares the alternatives and answers in about a minute.