This kit upgrades a mobility scooter from lead acid batteries to LiFePO4 (lithium iron phosphate) batteries. It includes two 12V 35Ah batteries, which store 420 Wh each. Many scooters use two 12V batteries connected in series to output 24V. The batteries are designed for 12V and 24V devices (run in series).
Each battery has integrated M6 screw terminals for use as a drop-in replacement for old lead acid batteries. A built-in battery management system (BMS) protects against over-charge, over-discharge, over-current and short-circuit. The case is ABS, and the cells are cylindrical and welded.
Lithium batteries need the included 24V 5A lithium charger and XLR adapter, which lets the charger plug directly into the scooter's charging port. Check the scooter's manual and consult the manufacturer before switching to lithium batteries, to confirm safety and compatibility.
- In the box
- 2 x 12V 35Ah LiFePO4 batteries (420 Wh each), 1 x 24V 5A LiFePO4 charger, 1 x XLR adapter, 1 x battery voltmeter
- Battery model
- ALF-012035A
- Charger model
- CRF-2405A
- Chemistry
- LFP (LiFePO4), lithium iron phosphate
- Case
- ABS
- Cells
- Cylindrical, welded assembly
- Voltage
- 12V per battery
- Capacity
- 35Ah
- Energy stored
- 420 Wh per battery
- Weight
- 8.6 lbs (3.9 kg) per battery
- Dimensions
- 195 x 130 x 168 mm (7.7 x 5.1 x 6.6 in), L x W x H, +/-2 mm (+/-0.1 in)
- Cycle life
- 3000+ cycles
- Terminals
- M6 screw terminals
- Charge voltage
- 14.6V
- Charge current
- 5.0 A
- Cutoff voltage
- 9.2V
- Discharge current
- 17.5 A nominal continuous, 35.0 A maximum continuous, 70.0 A peak (2 seconds)
- Charge temperature
- 0°C to 45°C
- Discharge temperature
- -20°C to 60°C
- Humidity
- 60±25% R.H. for operation and storage
- Protection
- Low voltage disconnect, over voltage disconnect, short circuit protection, reverse polarity protection, cell balancing
- Charger input
- AC 110V-240V, 50/60 Hz
- Charger output
- 29.2V DC, 5A
- Charger connector
- Anderson