Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The SwitchToLED Accent Series is a 12V DC COB LED strip sold in 5 m reels, with 528 LEDs per meter and a CRI above 90. The chip-on-board design gives a continuous, dot-free line of light instead of the individual spots you see on standard SMD strips, and it puts out up to 1400 lumens per meter. It comes in 3000K, 4000K or 6000K and can be cut every 2.46 inches at marked solder pads. It suits kitchen under-cabinet runs, shelving, accent walls and retail displays where a smooth line matters; against ordinary SMD strips it trades a higher watt draw and the need for a 12V driver for the seamless look.
In stockReturn policy
This 12V DC COB LED strip light uses Chip-on-Board technology to give continuous, dot-free light with no visible hotspots. It has 528 LEDs per meter and a CRI above 90. Output is up to about 1400 lumens per meter. It is made for indoor uses such as kitchens, shelves, accent walls and retail displays.
Each 5 m (16.4 ft) reel has 3M adhesive backing, and clips can also be used for mounting. The strip can be cut every 2.46 inches at marked solder pads. Strips can be joined end to end or around corners with solderless COB connectors, 20-24 gauge wire or soldering. Aluminum mounting channels are optional. They improve heat dissipation and give a finished look. The strip should not be bent at sharp angles. For 90° corners, use strip-to-wire connectors with a short wire.
The strip runs on 12V DC constant voltage and draws 14W per meter, about 1.2A per meter. A full reel uses about 70W. Size the power supply with 10-20% extra capacity. The strip cannot be powered by USB, which provides only 5V. It is fully dimmable with a 12V PWM dimmer placed between the strip and a dimmable power supply. It can also be used with a dimmable 12V power supply and a standard wall dimmer such as Lutron or Leviton.
