
12x24x2 Aerostar Air Filter
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Aerostar 12x24x2 is a pleated HVAC filter with a nominal 2-inch depth, made by Con-Air Industries in Orlando, Florida. Its deeper pleats hold roughly twice the debris of a 1-inch filter before pressure drop climbs, and the lower static pressure is easier on the blower motor. It comes in MERV 8, 11 and 13, so one filter line covers basic dust and pollen up to smoke and fine particulates. It suits older residential systems and light commercial units built for 2-inch filters, where it lasts longer between changes than a 1-inch equivalent.
In stockReturn policy
This is a 12 x 24 x 2 inch pleated air filter. Its actual measurements are 11 3/8" x 23 3/8" x 1 3/4". It comes in MERV 8, MERV 11 and MERV 13 ratings.
The 2-inch nominal depth gives the filter a longer service life than a standard 1-inch filter. It also runs at a noticeably lower static pressure across the filter, which is easier on the blower motor. Two-inch filters were standard in older residential systems and remain common in light commercial applications. The deeper pleats hold roughly twice the debris of a 1-inch equivalent before reaching the same pressure drop.
The pleated electrostatic media is manufactured by Con-Air Industries in Orlando, Florida. MERV 8 is the baseline grade for standard dust and pollen, MERV 11 covers pet households and most allergy concerns, and MERV 13 handles fine particulates including smoke, bacteria and virus carriers. Expect a service life of 4 to 6 months on MERV 8 and MERV 11 in normal residential use, and 2 to 4 months for MERV 13 or in heavier-load environments such as homes with multiple pets or active cooking schedules.
It checks today's price at every store, compares the alternatives and answers in about a minute.





