This is a 14-inch drop-in, quick-change electronic trigger tray with 6 triggers. The triggers are spread out to eliminate hot spots. The tray is about 1.5 inches tall.
It can replace the trigger on an electronic drum or drop into an acoustic drum. A rim piezo activates the rim zone. Attach it to the inside of the drum's side, or tape it to the bottom with the included tape circle.
The jack generally fits electronic drums and metal acoustic drums without issue. On wood or acrylic drums, the jack barrel is usually too short (8.5 mm) to pass through the vent hole and still take a jack nut. A vent hole adapter kit with three adapters is sold separately for these drums. Some acoustic drums are non-standard sizes, so a drum needs an inside diameter of 13 inches or larger for the tray to fit without modification.
- Size
- 14 inches
- Height
- Approximately 1.5 inches
- Triggers
- 6, plus a rim piezo for the rim zone
- Jack barrel
- 8.5 mm
- Min. drum diameter
- 13 inches inside diameter for fit without modification
- Compatibility
- Roland, most Alesis (Strata Prime and Core, Strike, Nitro Pro, Crimson 3), ATV, Efnote, Pearl Mimic, HXM, Millenium, Donner and more
- Not recommended for
- Yamaha or Alesis modules not listed above
- In the box
- Tray with rim piezo and tape circle
- Sold separately
- Vent hole adapter kit with three adapters