Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
SafeCope cerium oxide polishing powder is a 99% cerium oxide abrasive at 7–9 micron grit, sold as a 14 oz (400 g) tub. Mixed with water into a slurry, it works on glass only: windshields, windows, shower doors, aquarium glass, mirrors and glass panels. It targets water spots, oil film, wiper streaks, haze and light scratches, and needs firm pressure for at least 10 minutes per area. Against ready-made glass polishes it asks more of you — mixing, keeping the surface wet, and a hard pad or wool wheel — but the concentrated powder goes much further and the fine grit leaves fewer marks than coarser compounds.
In stockShips from Hong Kong SAR China · duties may applyReturn policy
This is a cerium oxide glass polishing powder, sold as 14 oz (400 g) at 99% purity with a 7-9 micron particle size. It removes light scratches, water spots, oil film, wiper marks, and haze from glass, and helps restore clarity. It also reduces hard water stains and mineral deposits.
It is for glass surfaces such as car windshields and windows, shower doors, aquarium glass, mirrors, and household glass panels. It is not recommended for plastic, acrylic, or painted surfaces.
The product is a powder, not a ready-to-use liquid. Mix it with clean water into a smooth slurry. Clean the glass first to remove dust, sand, grease, and debris, which helps prevent extra scratches. Apply the slurry with a hard sponge, felt pad, polishing pad, or wool wheel, and spread it evenly. Keep the surface slightly wet by adding a little clean water as needed. Polish with moderate to firm pressure for at least 10 minutes. You can polish by hand or with a rotary machine at about 500-2500 RPM.
