Prices are checked against each store and labelled with when.
This is a 12-inch sliding compound miter saw with a 15-amp copper motor turning the blade at 3800 RPM. It cuts compound angles both ways: the head bevels 45 degrees left and right, and the base miters 45 degrees in both directions. Sliding rails extend the crosscut capacity to about 13.2 by 4.1 inches at 90 degrees and 9.3 by 4.1 inches at a 45-degree miter, and nine positive stops lock in common angles. It suits trim carpenters, furniture builders and serious DIYers cutting crown molding and thick hardwood, and it competes with name-brand 12-inch sliders on capacity and angle range rather than on brand support.
In stockSold by DOVAMANReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
This is a 12" sliding compound miter saw with a 15 A copper motor that runs at 3800 RPM. It is black. The sliding rails extend to carry the blade through wide workpieces.
The saw bevels 45° to the left and right, and the miter base turns 45° in both directions, so the blade can be set for compound angle cuts. It cuts crown molding, furniture frames and joinery at these angles. The extended sliding rails give a maximum crosscut of 13.2" x 4.1" at 90° and 9.3" x 4.1" at a 45° miter, for oversized workpieces.
A dual-handed trigger with a safety paddle is set up for left- or right-handed use. Nine positive stops set common miter angles and repeat them. The saw has a dado slot.
It checks today's price at every store, compares the alternatives and answers in about a minute.









