
16" Center Mount Ball Bearing Drawer Slide Complete Consumer Pack
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Accuride 1029 is a center-mount, undermount drawer slide that runs on six large ball bearings in an all-steel, zinc-finished body. It gives three-quarter partial extension, so the drawer opens most of the way but not fully, and it carries light loads only. It suits furniture makers and repairers replacing a worn center slide in a dresser, desk or cabinet drawer. Against side-mount slides it is simpler to fit on drawers with no side clearance, but it holds far less weight and does not open fully.
In stockReturn policy
This is a 16-inch center-mount drawer slide, sold as a complete consumer pack with all installation parts and instructions. It mounts under the center of the drawer and opens to a partial 3/4 extension.
The slide is all steel with a zinc finish, and the mechanism rides on six large ball bearings. It is rated for a load of 35 lb (16 kg) and carries a RoHS certification.
It fits drawers 14 5/8 to 16 1/2 inches deep in cabinets 17 to 18 1/2 inches deep, and measures 16 7/8 inches overall. Allow 11/16 inch of clearance at the bottom of the drawer and at least 1/8 inch at the top and sides. To install, mount the cabinet piece on the cabinet and the drawer piece on the drawer, then push in from the front the way you would close the drawer.
It checks today's price at every store, compares the alternatives and answers in about a minute.





