This is a 3U rack mount for the UGREEN NASync DXP2800 and DXP2800 GT. It holds the NAS on its side in a standard 19-inch rack. The mount ships as both halves, the caged half that holds the NAS and a blank half, along with the screws and heat set inserts that join them.
The mount is 3D printed in PETG rather than PLA. A NAS with two spinning drives runs warm and sits powered around the clock, and PETG holds its shape at temperatures that soften PLA.
The blank half fills the full rack row. It can be swapped later to run two devices in the same rack row. Pieces pair within the same U height, so a 3U joins a 3U.
- Compatibility
- UGREEN NASync DXP2800 and DXP2800 GT
- Not compatible
- DXP4800, DXP4800 Plus, DXP480T Plus
- Rack size
- 19 inch
- Rack height
- 3U
- Orientation
- NAS lays on its side
- Material
- PETG
- Construction
- 3D printed
- Includes
- Caged half, blank half, screws, heat set inserts
- Not included
- Rack screws, NAS
- Modular
- Blank half can be swapped to run two devices in one rack row; pieces pair within the same U height