This router kit includes a 2-1/4 HP variable speed motor with both a fixed base and a plunge base. The motor has a soft start. Constant Response Circuitry maintains constant speed under load and provides overload protection.
The fixed base has hardwood handles and can be used upright or above or under a router table. Its adjustment system has coarse and micro-fine adjustment with a resettable depth indicator. The motor housing does not rotate during depth adjustment, so the bit does not move horizontally.
The plunge base has a quick clamp system for removing the motor. Fine adjustment on the depth rod sets bit depth quickly. Contoured soft grip handles give access to the plunge release lever. Both bases have a precision centering design that centers the bit and helps keep it on the cutline when using jigs, templates or dovetail jigs. Wide openings in the bases and sub-bases allow larger bits and give better visibility.
- Model
- Bosch 1617EVSPK
- Motor
- 2-1/4 HP, 120V, 12A
- Speed range
- 8,000 – 25,000 RPM, variable
- Speed control
- Dial
- Base diameters
- 6" fixed, 6-11/16" plunge
- Base openings
- 3-3/4" fixed and plunge
- Subbase openings
- 2" fixed and plunge
- Weight
- 19.5 lb
- Switch and cord
- Right or left location
- Safety
- Double insulated
- In the box
- 2-1/4 HP VS router motor, plunge base with chip shield, fixed base with chip shield, 1/4" self-releasing collet chuck, 1/2" self-releasing collet chuck, shaft and collet wrench, T-handle height adjust