2-2-4 SER Aluminum Service Entrance Cable

APPLICATION:

Aluminum Service Entrance Cable is primarily used as a panel feeder in multiple unit dwellings and for branch circuits. This is a 2 conductor SER plus a bare ground . Maximum operating temperature is not to exceed 90°C in wet and dry locations. Voltage rating is 600 volts.

CONDUCTOR:

8000 series aluminum alloy, solid or compact stranded.

CONDUCTOR COLORS:

Black and Red

JACKET COLOR:

Gray

GROUND SIZE:

4 Gauge

ASSEMBLY:

Two insulated conductors and a bare ground conductor cabled together and covered with a reinforced binder tape.

INSULATION:

Type XHHW-2 cross-linked polyethylene (XLPE).

AMP RATING:

75ºC - 90 Amps

90ºC - 100 Amps

All values are nominal and subject to correction. **Ampacities shown are for general use as specified by the National Electrical Code, 2023 Edition Table 310.16 & article 338.10. For dwelling, conductors shall be permitted at listed ampacities to be utilized as 120/240 volt, 3-wire, single-phase service and feeder conductors that serve as the main feeder per NEC article 310.12.