It checks today's price at every store, compares the alternatives and answers in about a minute.
A 2.8-inch IPS touchscreen made to sit directly on a Raspberry Pi Pico. It gives you a 320x240 display with 262K colors, resistive touch, a microSD slot and a programmable backlight. Female headers on the back take the Pico with no wiring or ribbon cable, and there is a reset button on the rear. It suits Pico owners building a handheld, a status panel or a small instrument who want a screen without a custom carrier board. Rivals in this class differ mainly in panel type and input: this one is resistive, so it works with a stylus or a fingernail rather than multi-touch fingers, and it trades the sharper, larger panels of pricier Pico displays for a simple plug-in fit.
In stockShips from the UK · priced in GBP (£11.50) · duties may applyReturn policy
Owners rate it well, with 4.6 out of 5 from 10 ratings. The plug-in fit and the working touchscreen are the parts people single out.
This is a 2.8-inch IPS LCD display with a resistive touchscreen, built for the Raspberry Pi Pico. It shows a 320 x 240 resolution in 262K colours.
Female headers on the back of the board take the Pico directly, so no connecting wires or ribbon cables are needed. The Pico needs male headers soldered to it to slot in. A microSD card slot on the board stores images for a project, the backlight is programmable for brightness and lower power use, and a reset button sits on the rear.
The touchscreen is resistive, not capacitive, and runs through a dedicated XPT2046 controller. The display uses an ST7789 driver and communicates over SPI at an operating voltage of 5V. C/C++ example code and a CircuitPython tutorial are available for getting a project running.