Compared across 2 stores. Prices are checked against each store and labelled with when. Store links may earn us a commission. As an Amazon Associate, Deal.ai earns from qualifying purchases.
It checks today's price at every store, compares the alternatives and answers in about a minute.
These are 22-inch, side-mount drawer slides with full extension and an adjustable soft-close mechanism. The 1.4mm cold-rolled steel build with a nickel finish is rated for 100 pounds and was tested through more than 66,000 open and close cycles. A tension screw lets you tune the close for light or heavy drawers, and a quick-release lever lets you lift the drawer out for cleaning. They suit kitchen, bathroom and workshop drawers that need full access to the back and a quiet, self-closing action. Against basic ball-bearing slides, the adjustable soft close and the heavier steel are the main step up; against premium undermount slides, side mounting is simpler to retrofit but leaves the mechanism visible on the drawer side.
In stockReturn policy
Availability unknown
As an Amazon Associate, Deal.ai earns from qualifying purchases.
Store links may earn us a commission.
Lowest price we've seen: $23.99 on Nov 11 at Amazon. Tracked across 1 store since Nov 11.
These 22-inch (550 mm) side-mount drawer slides have a soft-close mechanism that slows the drawer as it shuts, which reduces noise and impact on the drawer and cabinet frame. The spring tension is adjustable: turn it to "+" for heavier drawers and added holding force, or to "–" for lighter drawers to reduce bounce.
The slides are made from 1.4 mm cold-rolled steel with a rust-resistant nickel finish and use smooth ball bearing operation. They support 100 pounds and were tested through more than 66,000 open and close cycles. The 3-fold, 3-stage design extends fully, so the whole drawer pulls out and the items at the back are easy to reach.
Installation is side-mount, and a quick-release lever lets you remove the drawer for cleaning or maintenance. Before mounting, check that the drawer depth matches the slide length. Leave a 1/2-inch (12.7 mm) gap on both sides between the drawer and the cabinet. Installation hardware and instructions are included.
