

This is the self-propel drive belt for Honda HRN216 series 21-inch walk-behind mowers. It measures 3/8 inch wide by 39.2 inches outer circumference and is made of a rubber composite for wear resistance and flexibility. It transfers power from the engine crankshaft to the transmission, restoring self-propel when the old belt is cracked, glazed, stretched or slipping. It is a single-purpose replacement part, so it only makes sense for owners of the listed HRN216 models; shoppers with other mower brands or models need a different belt.
In stockShips from Hong Kong SAR China · duties may applyReturn policy
Owners rate this belt highly and describe it as a direct fit that brings self-propel back. Most mention easy installation and quiet, consistent drive engagement afterward.
This is a self-propel drive belt, part number 22431-VR8-N03, for Honda 21 inch walk-behind mowers in the HRN216 series. It transfers power from the engine crankshaft to the mower's transmission.
The belt is made from a rubber composite for wear resistance and flexibility. It measures 3/8" wide with a 39.2" outer circumference.
Replace the belt if it shows cracks, fraying, glazing or tearing, or if the mower loses self-propel function or drive engagement is inconsistent. Squealing or slipping sounds from the belt area, or a belt that looks stretched or loose, are also signs it needs replacing. When installing, disconnect the spark plug wire first and route the belt correctly around all specified pulleys and guide pins. Check the belt tension afterward, and consult the mower's owner or service manual for the full procedure.