What do I need to run it?

A Windows 7 or newer PC with an Intel Core i5 or better, at least 8 GB of RAM, a discrete graphics card and a 1000 MB network interface. It runs DTF Master RIP software and accepts PNG, JPG and TIFF files.

Is it better than a single-head 24-inch DTF printer?

Two I3200-A1 heads print the same width faster and support higher-quality pass settings at production speed. A single-head machine is simpler and cheaper to maintain but slower on large jobs.

What else do I need to finish DTF prints?

A DTF powder shaker and a heat press for curing and transferring. The printer lays down the film and adhesive ink; powdering and curing are separate steps.

Can it print on fabric directly?

No. It prints onto DTF film, which is then powdered, cured and heat-pressed onto garments. It is not a direct-to-garment printer.

What file formats does it accept?

PNG, JPG and TIFF through DTF Master RIP.

H-E

24" DTF Printer with Dual E*pson I3200-A1 Printheads

Best price now

$7,995.00at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

H-E

24" DTF Printer with Dual E*pson I3200-A1 Printheads

Best price now

$7,995.00at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $7,995.00 at Walmart on Nov 10.

Our take on the 24" DTF Printer with Dual E*pson I3200-A1 Printheads

This is a 24-inch direct-to-film printer built for garment decoration shops. It uses two Epson I3200-A1 printheads, which is the setup that separates it from single-head 24-inch DTF machines: two heads lay down ink faster and let you run higher pass counts without losing throughput. It needs a Windows 7 or newer PC with an Intel Core i5 or better, 8 GB of RAM or more, a discrete graphics card and a gigabit network connection, and it runs DTF Master RIP. It suits small print shops and apparel decorators moving up from A3/13-inch DTF units; hobbyists will find the PC requirements and upkeep heavier than the output justifies.

Best forSmall apparel decoration shopsPrint shops moving up from 13-inch DTFShops needing faster 24-inch film outputGarment businesses doing short runs

Pros

Dual Epson I3200-A1 heads for faster output than single-head 24-inch DTF printers
24-inch width handles large film sheets and gang-run jobs
Runs on standard DTF Master RIP software
Gigabit network interface for fast file transfer
Windows 7 through 10+ compatibility

Cons

Needs a reasonably strong PC: Core i5, 8 GB RAM, discrete graphics
DTF requires powder shaker and curing equipment to finish prints
Dual printheads raise maintenance and replacement cost
No mention of included RIP license or starter supplies

24" DTF Printer with Dual E*pson I3200-A1 Printheads prices at every store

WalmartNew
In stockSold by PrintingSuppliesReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$7,995.00Free shippingChecked Nov 10
Visit Walmart

About the 24" DTF Printer with Dual E*pson I3200-A1 Printheads

This is a 24-inch DTF (direct-to-film) printer with two Epson I3200-A1 printheads. The maximum printing width is 24 inches.

It connects to a computer over a 1000MB network interface and prints from PNG, JPG and TIFF image files. It uses DTF Master RIP software.

Printheads: 2 x Epson I3200-A1
Max print width: 24 inches
Image formats: PNG, JPG, TIFF
RIP software: DTF Master RIP
Interface: 1000MB network interface
Operating system: Windows 7, Windows 10 or later
Computer CPU: Intel Core i5 or better
Computer memory: 8 GB or more
Computer graphics: Discrete graphics

Specifications

resolution: 24" DTF PrinterSource
color: OtherSource
size: 24"Source

Questions and answers

What do I need to run it?: A Windows 7 or newer PC with an Intel Core i5 or better, at least 8 GB of RAM, a discrete graphics card and a 1000 MB network interface. It runs DTF Master RIP software and accepts PNG, JPG and TIFF files.
Is it better than a single-head 24-inch DTF printer?: Two I3200-A1 heads print the same width faster and support higher-quality pass settings at production speed. A single-head machine is simpler and cheaper to maintain but slower on large jobs.
What else do I need to finish DTF prints?: A DTF powder shaker and a heat press for curing and transferring. The printer lays down the film and adhesive ink; powdering and curing are separate steps.
Can it print on fabric directly?: No. It prints onto DTF film, which is then powdered, cured and heat-pressed onto garments. It is not a direct-to-garment printer.
What file formats does it accept?: PNG, JPG and TIFF through DTF Master RIP.
Where is the 24" DTF Printer with Dual E*pson I3200-A1 Printheads cheapest?: At Walmart, for $7,995.00, as of our latest check.

More dtf printers

R1390 A3+ DTF Printer C13

L1800 A3+ DTF Printer E13