This Azusa kit includes most of the parts needed to build a minibike with 5" wheels. The engine and clutch are not included.
The kit has a frame, forks, two 5" aluminum wheels with 5/8" precision ball bearings, and front and rear tires with inner tubes. The rear tire is studded and the front tire is a sawtooth pattern. It also has a 12" plush seat, folding foot pegs, a brake assembly with lever and cable, and a throttle kit.
A #35 72T stamped steel drum/sprocket and a #35-1R chain are included, along with axles, bushings, bolts, locknuts, clamps and conduit hardware.
- Wheels
- 2 x 5" aluminum, with 5/8" precision ball bearings
- Tires
- Rear: studded 410/350 x 5". Front: sawtooth 410/350 x 5".
- Inner tubes
- 2 x 410/350 x 5"
- Seat
- 12" plush
- Drum/sprocket
- Stamped steel, #35, 72T
- Chain
- #35-1R x 127 pitch (47-5/8")
- Brake
- 4-1/2" brake assembly with 5/8" bore; 7/8" ID brake lever; 56" cable with 48" housing
- Throttle
- Throttle kit with dummy, cable and housing, 7/8"
- Axles
- Front 5/8-18 x 6.75; rear 5/8-18 x 8.75
- Bushings
- 3 x 5/8" ID x 1" OD x 1-1/4" (2 front, 1 rear); 1 x 5/8" ID x 1" OD x 1-7/8" (rear); 1 x 5/8" ID x 1" OD x 1-1/8" (rear)
- Hardware
- 3 x 1/4-20 x 5/8" seat bolts; 2 x 5/16-18 x 1" foot peg bolts with 2 x 5/16-18 locknuts; 1 x 5/8-18 x 6" unplated fork-to-frame bolt; 5 x 5/8-18 locknuts; 2 x 5/16-24 jamnuts; 4 clamp halves
- Cable parts
- Wire stop with screw, wire swivel with screw, 6 conduit clips, conduit clamp 3/16" ID x 7/32", straight conduit retainer 5/16-24 x 2", spring 1/4" ID x 3"
- In the box
- Frame, forks, 2 wheels, 2 tires, 2 inner tubes, drum/sprocket, bushings, bolts, locknuts, seat, brake lever, folding foot pegs (pair), brake cable, brake assembly, throttle kit, wire stop, wire swivel
- Not included
- Engine and clutch