3M IJ180CV3 is a 2 mil printable cast vinyl film for vehicle wraps, fleet graphics and watercraft. Its pressure-activated adhesive lets you slide and reposition the film before it locks down, and Comply v3 air release channels let trapped air escape for bubble-free installation. It stretches about 130% without primer, conforms over rivets and corrugations, and is cleanly removable for up to two years. It is a professional print medium, not a peel-and-stick consumer decal: you need an eco-solvent or similar printer and a laminator to finish it.
In stockReturn policy
Rated 4.8 out of 5 from 73 ratings, buyers consistently praise how easily the film installs and how well it conforms. Complaints center on the extra equipment and lamination needed to finish a job.
The 3M IJ180CV3 Controltac is a 2 mil, inkjet printable vinyl wrap film. It is a long-term, removable film for car wraps, fleet graphics and watercraft, and it can be applied even over corrugations and rivets.
The film uses a pressure-activated adhesive that is slideable and repositionable, with medium to higher tack. It also has Comply v3 adhesive, with lifting resistance from channels and contours. Non-visible air release channels on the back of the vinyl let air flow through during application, which helps prevent bubbling and allows fast installation.
The film stretches 130% with no primer or lifting. Expected outdoor performance is 5 to 10 years. Combining printing and laminating materials from different manufacturers voids the manufacturer's warranty.







