This kit pairs a 4.3-inch TFT LCD monitor with a waterproof reverse camera to give a view behind the vehicle when backing up. The camera has built-in infrared night vision for low-light reversing and a wide viewing angle that covers blind spots. It has an IP68 rating, so it can handle rain and car washes.
The monitor accepts two video inputs, V1 and V2, with V1 taking priority. It detects PAL and NTSC signals automatically and shows a black screen when there is no signal. It works with 12V vehicles, including vans, utes and small trucks.
The camera mounts at the rear, at the license plate or the window. When its power is connected to the reversing light, the monitor turns on automatically as you reverse. It can also show a continuous video feed if configured.
- Screen size
- 4.3-inch TFT LCD, 16:9 ratio
- Resolution
- 320 (H) x RGB x 240 (V)
- Video inputs
- 2 (V1 and V2), V1 has priority
- Video system
- PAL and NTSC, auto detection
- Monitor power
- DC 12V, 2W
- No signal
- Auto black screen
- Monitor size
- 120 mm x 75 mm x 15 mm
- Camera night vision
- Built-in infrared (IR)
- Camera waterproofing
- IP68
- Camera output
- RCA 1.0Vp-p, 75Ω
- Effective pixels
- 720 x 576 (PAL), 720 x 480 (NTSC)
- Camera power
- DC 8V–12V
- Operating temp
- -30°C to 65°C
- Compatibility
- 12V vehicles, including vans, utes and small trucks
- In the box
- 1 x 4.3" TFT LCD monitor, 1 x wide-angle night vision reverse camera, 1 x monitor power cable, 1 x camera power cable, 1 x 6 m RCA video cable, 1 x user manual