This is an electric conversion kit for fat-tire bikes. It has a brushless gearless rear hub motor with a 7-speed freewheel, in 20, 24 or 26 x 4.0 inch wheel sizes. The motor runs on 48V, 60V or 72V and is rated from 3300W at 48V to 5000W at 72V. It has a tile magnet design and is built for low noise and long working life. It suits fat-wheel e-bikes, e-motorcycles and e-tricycles.
The kit includes everything needed to convert a bike except the battery. It comes with a 100A sine wave programmable controller, a color TFT UKC1 display, a twist throttle, a pedal assist sensor and a 4-piston hydraulic disc brake set. A Bluetooth module lets you change settings from a phone. The rear hub motor needs a dropout width of 175mm or 190mm.
The controller uses FOC drive to reduce motor torque ripple. It matches itself to the motor through self-learning, which takes 2 to 3 minutes the first time. It works with or without the display. Voltage, current limit, speed and other parameters can be set through the mobile app or a computer. It has protection against over-voltage, under-voltage, over-current, overload, over-temperature, locked rotor and runaway. The case is anodized aluminum with a thick aluminum heat sink plate.
- Voltage
- 48V, 60V or 72V
- Rated power
- 48V 3300W to 72V 5000W
- Peak power
- 48V 4800W to 72V 8000W
- Wheel sizes
- 20, 24 or 26 x 4.0 inch fat wheel
- Motor
- Brushless gearless rear hub motor, tile magnet
- Freewheel
- 7-speed
- Dropout width
- 175mm or 190mm rear hub motor (7-speed gear) required
- Motor efficiency
- Over 90%
- Max torque
- Over 160 N.m
- Speed
- About 85 to 95 km/h
- Controller
- Sabvoton 24 MOSFET 100A sine wave programmable controller, 48V/60V/72V input
- Controller functions
- 5-speed level for throttle and PAS, speed limit, reverse, anti-theft, regenerative braking, electric braking, keyless start, cruise
- Display
- Color TFT UKC1 with 5-level PAS, speed limit, speed display, regenerative function
- Brakes
- 4-piston hydraulic disc brake (levers and calipers)
- Throttle
- Twist throttle
- Pedal assist
- 8-magnet PAS sensor
- Connectivity
- Bluetooth module for phone app settings; optional CAN bus for body instrument and BMS
- Certificates
- CE, EN60335-1:2012+A112014
- In the box
- Rear hub motor wheel, controller, UKC1 display, brake levers and calipers, twist throttle, PAS sensor, Bluetooth module
- Not included
- Battery
- Optional parts
- 20, 24 or 26 x 4.0 inch tire and tube