
5 Set Hex Chicago Screws, Metric Hex Drive Socket Cap 8 x 100 mm Bolts and 8 x 18 mm Nuts Binding Screw Posts, Black
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A five-set pack of M8 x 100 mm hex-drive Chicago screws in black 45# carbon steel, each pairing a socket cap bolt with an 18 x 10 mm nut. The 59 mm thread length and 1.25 mm pitch suit binding thick stacks of leather, board or metal where a removable, reusable joint is wanted. Strength grade 4.8 puts them in the general-purpose class, well below high-tensile fasteners, so they are for clamping and binding rather than structural load. Compared with aluminum or brass binding posts they resist wear better but are heavier and need an 8 mm hole and a hex key to fit.
In stockShips from Hong Kong SAR China · duties may applyReturn policy
This is a five-set pack of black hex Chicago screws, also called binding screw posts. Each set pairs an M8 x 100 mm socket cap bolt with an 8 x 18 mm nut. The fasteners are made of 45# carbon steel and have a strength level of 4.8.
The bolt has a hex socket drive, a 16 mm cap diameter, and a 1.25 mm thread pitch. Its thread length is 59 mm, and the threaded hole diameter is 8 mm. The fitting is made for a 3/8-inch (10 mm) hole.
The screws are used in leather crafting, garment construction, photo albums, scrapbooks, bags, furniture, and wooden boards. To install, pre-drill holes in the two objects to be connected, insert the bolt and nut, and tighten them with a screwdriver. The locked object thickness must be less than the length of the screw plus the nut rod.






