
5 Set Hex Chicago Screws, Metric Hex Drive Socket Cap 8 x 70 mm Bolts and 8 x 18 mm Nuts Binding Screw Posts
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A five-set pack of M8 hex-drive Chicago screws: 70 mm socket cap bolts paired with 18 x 10 mm hex nuts, made of 45# carbon steel in black with a 4.8 strength level. The long 70 mm thread and 16 mm cap suit joining thick stacks such as leather bags, photo albums, furniture panels and workbench boards. They tighten and release with a hex key, so they come apart again, unlike rivets. The trade-off is that the joint only clamps as deep as the bolt and nut rod allow, and 4.8-grade carbon steel is a moderate strength class, not a high-tensile fastener.
In stockShips from Hong Kong SAR China · duties may applyReturn policy
This is a five-set pack of hex-drive Chicago screws: socket cap bolts with matching nuts that fasten two pieces together. They are used in leather crafting and garment construction, and for joining boards and other objects such as albums, scrapbooks, bags, tables, chairs, workbenches and cabinets.
The bolts and nuts are made of 45# carbon steel with a black finish and a strength level of 4.8. The thread is M8 x 70 mm with a 1.25 mm pitch, the cap measures 16 mm across, and the hex socket is 18 x 10 mm (length x outer diameter).
To install, pre-drill holes in the two objects, insert the bolt and nut, and tighten with a screwdriver. The pieces being joined must be thinner than the screw plus nut rod, or the fitting will not tighten.