This is an aftermarket 5-wire magneto stator for 2-stroke 50cc engines based on the Minarelli Jog design. It is a direct-replacement, plug-and-play part. It suits most Chinese 49cc and 50cc 2-stroke engines of this type, including scooters and 2-stroke quad bikes and ATVs.
The stator has 7 coils, one of which is insulated, and is made with the highest grade lamination materials. It has 5 wires, a 3-pin plug with 2 loose trailing wire connectors, and 2 mounting holes spaced 104 mm apart. A pickup pulsar coil, a connector and a rubber grommet are included.
There are several versions of the 50cc stator, so compare the stator and plug with your original part before buying. The wire colors may differ from the original, but the wires are installed in the correct order and should not be rewired. Before installing, check the stator's AC output and replace any burned or corroded connectors. Use locking compound on the mounting bolts and check the pickup air gap.
- Type
- Stator coil, aftermarket, brand new
- Fits
- Most Chinese 49cc and 50cc 2-stroke engines based on Minarelli (Jog); 2-stroke quad bikes, ATVs and scooters
- Similar to
- Parts used on many 100cc CPI products, Quadzilla Buzz 50cc bikes and Aeon ATVs
- Poles
- 7 coils, one of which is insulated
- Wires
- 5
- Plug
- 1 x 3-pin plug with 2 trailing wire connectors (3 + 1 + 1 pins)
- Mounting holes
- 2, 104 mm / 4.08 in center to center
- Center hole
- 22 mm / 0.87 in (smallest); 28 mm / 1.1 in (greatest)
- Pole outer diameter
- 79 mm / 3.15 in (greatest)
- Stator diameter
- 117.30 mm / 4.62 in (greatest, excluding pickup)