
6 Gallon 3.0 Peak HP Wet/Dry Vacuum, 3 in 1 Function
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Last seen at $100.00 at Dapper Supply on Nov 17.

Prices are checked against each store and labelled with when.
A 6-gallon shop vacuum with a stainless steel tank and a 3.0 peak HP motor rated at 18 kPa, 108 CFM and 74.3 inches of water lift. It works three ways: wet pickup, dry debris and a blower, and it ships with two filters, a 3.9 ft hose and a 16.4 ft cord. The stainless tank and dual filtration put it a step above plastic-tank budget vacs, though the peak-HP figure is a marketing rating, not running amps. A sensible pick for garage, job-site and car cleanup where both dust and spills happen.
In stockReturn policy
This is a 6-gallon wet/dry vacuum with a 3-in-1 design: it vacuums wet messes, picks up dry debris, and works as a blower. The tank is made of rust-resistant stainless steel, and the 6-gallon capacity means fewer trips to empty it. It is intended for job sites, garages and home use.
A 2100W peak motor produces 18 kPa of suction, 108 CFM of airflow and 74.3 inches of water lift. Two filters handle different debris: a wide filter for carpet and pet hair and a cylinder filter for fine particles and dust. The vacuum uses a bagged design for disposal, and it runs at 78–80 dBA.
The power cord is 16.4 ft long and the flexible hose is 3.9 ft, so you can cover a wide area without unplugging. Wheels and a carry handle move it around. Included attachments are a floor brush, a crevice tool, a utility nozzle, extension wands and replaceable filters. The vacuum is UL certified.
It checks today's price at every store, compares the alternatives and answers in about a minute.