This is a window insulation kit: a sheet of transparent plastic film that goes over a window and holds in place with adhesive hook-and-loop tape. It keeps a room warm in winter and cooler in summer, and the film can be cut to fit the window.
The film is made of thickened PE, about 0.12 mm thick and roughly 75% thicker than ordinary window insulation. It is waterproof and made to resist tearing and wind, with enough stretch and toughness to hold its shape without deforming. It goes up with few wrinkles, and no heat-shrink treatment is needed.
To install, measure the window including the frame and cut a piece of film larger than the opening. Peel the adhesive loop tape onto the frame, press the film in place, and lower the strap to open the window for ventilation; extra hook-and-loop fasteners at the top and sides add reinforcement, and no drilling tools are required. To clean, take the film down, rinse it, let it dry and put it back, or wipe it with a damp cloth. It folds for storage and reuse.
- Material
- Thickened PE film
- Thickness
- About 0.12 mm
- Film size
- 75 x 79 in (190 x 200 cm)
- In the box
- 1 film sheet, 2 rolls of 0.78 in wide hook-and-loop tape
- Attachment
- Adhesive hook-and-loop tape; no drilling
- Cuttable
- Yes; measure the window including the frame and choose film larger than the opening
- Reusable
- Yes; folds for storage
- Care
- Wipe with a damp cloth, or remove, rinse and dry before reinstalling
- Waterproof
- Yes
- Heat shrink
- Not required
- Applications
- Aluminum frames, sash and casement windows, bathroom windows, doors, attic fans and vents, louver covers